Jacuzzi light for polyester and liner pools 3w 2 inches

XPRO Pool
SM400W-3

Underwater LED Lamp IP68 Spa Pool Lamp 3W for Liner Concrete and Fiberglass 12V  RGB Lights Color CE ROSH FCC

SINGLE COLOR or RGB or RGBW with white : Warm wit
Out of Stock
$74.47
Quantity

Underwater LED Lamp IP68 Spa Pool Lamp 3W for Liner / Fiberglass 12V RGB Lights Color CE ROSH FCC

Feature:

Used for both fresh and salt water pool.

High transmittance, the light is uniform and bright.

Easy to install, fits standard 2 inch wall mount.

Widely used in swimming pools, plastic film pools, spa pools, etc.

Warm White/RGB Colour

The lights has different kinds of colour styles. With on/off function, you can change the colour with the power on/off in short time.

The lights cycle with the mode. When the power is turned off, it will start from the first light mode.

Warm Reminder:

Please test our light in the underwater. Not on land, because this light needs water to dissipate the heat.

You must use toroidal transformer or square transformer (not included) to connect this lamp, output must be 12V AC.

Just fix our lamp in your two inch wall mounting as the installation picture we provide. And this lamp can not install with screws.

We don't recommend you to use only one lamp in one pool. Because controller is for controlling and synchronizing multiple lights in one pool.

Specifications

- Fully resin filled, 100% waterproof

- 2 wire external 

- Size : 103×125 mm

- Voltage: AC12V

- Waterproof grade: IP68

- Beam angle: 120°

- Working environment temperature: -25°C~45°C

- Wattage : 3 Watt

- Number of leds : 18 pcs

- Brand leds : Epsper / Sanan 2835

- Light colour : Warm white / RGB 

- Cable length : 2 metres

- Energy class : +A

- Material : Fully resin filled plastic | Anti UV PC

- Light intensity : Flux (Lm): 180±10%Lm(White)/70±10%(RGB)

- Extremely energy efficient, with a lifespan of up to +-40,000 hours possible 

- Two years warranty

Quality pool lights

The XPRO POOL we choose quality. The pool lights are made of high quality ABS and are highly resistant to chemicals and UV-C.

If you have any questions before or during installation, please call us and we will explain it to you in detail. That is a lot better to convey than to work out the entire installation instruction on this online shop. We are happy to advise you.

IMPORTANT 

- The product must not be tested out of the water for longer than 30 seconds. 

- There is no transformer included.

: SM400W-3
Out of Stock

You might also like