Outgoing Pool Lights
Are you looking for pool lights but don't want to spend too much? Then we have good news for you! In our Outgoing Pool Lamps category, you'll find lamps that will soon be no longer available in our collection. It's your last chance to score these!
We still have a few pieces in stock and the principle is simple: gone = gone. So don't wait too long, because before you know it, you'll miss out on this great deal.
Light up your pool with our lamps and make your neighbors jealous! Grab this chance before it's too late.
Are you looking for a small lamp for a concrete pool with liner, this is the solution. Available in singel colours and RGB.
Comes complete with wall adapter.
Specifications
- Fully resin filled, 100% waterproof
- Size 100 x 87,5 mm
- 2 wire external 4 wire external RGB
- Cable length : 2 metres
- Voltage: AC 12V
- Waterproof grade: IP68
- Beam angle: 120°
- Working environment temperature: -25°C~45°C
- Wattage : 6 Watt
- Brand leds : Epsper 2835
- Light colour : Warm white K3000 - RGB
- Energy class : +A
- Light intensity : W 800 - RGB 550 Lumen
- Extremely energy efficient, with a lifespan of up to +-40,000 hours possible
- Three year warranty
Quality pool lights
At XPRO POOL we choose quality. The pool lights are made of high quality material and are highly resistant to chemicals and UV-C.
If you have any questions before or during installation, please call us and we will explain it to you in detail. This is a lot better than having to explain the entire installation process in this online shop. We are happy to advise you.
IMPORTANT
- The product must not be tested out of the water for longer than 30 seconds.
- No transformer is included.
Are you looking for a small lamp for a concrete pool with liner, this is the solution. Available in singel colours and RGB.
Comes complete with wall adapter.
Specifications
- Fully resin filled, 100% waterproof
- Size 100 x 87,5 mm
- 2 wire external 4 wire external RGB
- Cable length : 2 metres
- Voltage: AC 12V
- Waterproof grade: IP68
- Beam angle: 120°
- Working environment temperature: -25°C~45°C
- Wattage : 6 Watt
- Brand leds : Epsper 2835
- Light colour : Warm white K3000 - RGB
- Energy class : +A
- Light intensity : W 800 - RGB 550 Lumen
- Extremely energy efficient, with a lifespan of up to +-40,000 hours possible
- Three year warranty
Quality pool lights
At XPRO POOL we choose quality. The pool lights are made of high quality material and are highly resistant to chemicals and UV-C.
If you have any questions before or during installation, please call us and we will explain it to you in detail. This is a lot better than having to explain the entire installation process in this online shop. We are happy to advise you.
IMPORTANT
- The product must not be tested out of the water for longer than 30 seconds.
- No transformer is included.
Are you looking for a small lamp for a concrete pool with liner, this is the solution. Available in singel colours and RGB.
Comes complete with wall adapter.
Are you looking for a small lamp for a concrete pool with liner, this is the solution. Available in singel colours and RGB.
Comes complete with wall adapter.
Are you looking for a small lamp for a concrete pool with liner, this is the solution. Available in singel colours and RGB.
Comes complete with wall adapter.
Ultra Thin LED Transformer 12V DC IP67
This transformer is suitable for 12V LED Lamps / Strip with a maximum consumption of 300W. Its thin size makes it very practical to connect and place in any small space.
- DC Voltage: 12V DC
- Current : 25A
- Ripple & Noise: 80MV
- DC Adjustable Range: ±10%
- Rated Voltage Voltage Tolerance: ±2.0%
- Line Regulation: ±0.5%
- Load Regulation: ±1% Setup,Rise Time,Hold Up Time:200ms,50ms, 20ms/230VAC AC
- Voltage Range: 190-264VAC
- Frequency Range: 47-63Hz
- Efficiency:85%
- AC Current: 0.4A/230V
- AC Inrush Current: 40A/230V
- Leakage Current< 0.5mA /240VAC
- Over-load: 105%-150% hiccup mode,Auto-recovery
- Over-voltage: 115%-135% Cut Off the Output,Auto-recovery
- Over-temp. : Shut down O/P voltage, Auto-recovery
- Working temp.: -10~ +60C° (Refer to output load derating curve)
- Working Humidity:20 ~ 90% RH, non-condensing
- Storage Temp.: -10~ +60C°
- Storage Humidity: 10 ~ 95% RH
- Isolation Resistance:I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC / 25C°/ 70% RH
- Withstand Voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
- Safety standards: CE,RoHS,FCC,ISO9001
Ultra Thin LED Transformer 12V DC IP67
This transformer is suitable for 12V LED Lamps / Strip with a maximum consumption of 300W. Its thin size makes it very practical to connect and place in any small space.
- DC Voltage: 12V DC
- Current : 25A
- Ripple & Noise: 80MV
- DC Adjustable Range: ±10%
- Rated Voltage Voltage Tolerance: ±2.0%
- Line Regulation: ±0.5%
- Load Regulation: ±1% Setup,Rise Time,Hold Up Time:200ms,50ms, 20ms/230VAC AC
- Voltage Range: 190-264VAC
- Frequency Range: 47-63Hz
- Efficiency:85%
- AC Current: 0.4A/230V
- AC Inrush Current: 40A/230V
- Leakage Current< 0.5mA /240VAC
- Over-load: 105%-150% hiccup mode,Auto-recovery
- Over-voltage: 115%-135% Cut Off the Output,Auto-recovery
- Over-temp. : Shut down O/P voltage, Auto-recovery
- Working temp.: -10~ +60C° (Refer to output load derating curve)
- Working Humidity:20 ~ 90% RH, non-condensing
- Storage Temp.: -10~ +60C°
- Storage Humidity: 10 ~ 95% RH
- Isolation Resistance:I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC / 25C°/ 70% RH
- Withstand Voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
- Safety standards: CE,RoHS,FCC,ISO9001
Ultra Thin LED Transformer 12V DC IP67
This transformer is suitable for 12V LED Lamps / Strip with a maximum consumption of 100W. Its thin size makes it very practical to connect and place in any small space.
Output:12V 25A 300W
Size:238*33*73mm
Weight:1.3kg
Cooling: Air
Ultra Thin LED Transformer 12V DC IP67
This transformer is suitable for 12V LED Lamps / Strip with a maximum consumption of 100W. Its thin size makes it very practical to connect and place in any small space.
Output:12V 25A 300W
Size:238*33*73mm
Weight:1.3kg
Cooling: Air
Ultra Thin LED Transformer 12V DC IP67
This transformer is suitable for 12V LED Lamps / Strip with a maximum consumption of 100W. Its thin size makes it very practical to connect and place in any small space.
Output:12V 25A 300W
Size:238*33*73mm
Weight:1.3kg
Cooling: Air
Ultra Thin LED Transformer 12V DC IP67
This transformer is suitable for 12V LED Lamps / Strip with a maximum consumption of 200W. Its thin size makes it very practical to connect and place in any small space.DC Voltage: 12V DC
Output:12V 16.6A 200W
Size:218*62*26mm
Weight:0.81kg
Cooling: Air
DC Voltage: 12V DC
Current : 16.6A
Ripple & Noise: 80MV
DC Adjustable Range: ±10%
Rated Voltage Voltage Tolerance: ±2.0%
Line Regulation: ±0.5%
Load Regulation: ±1% Setup,Rise Time,Hold Up Time:200ms,50ms, 20ms/230VAC AC
Voltage Range: 190-264VAC
Frequency Range: 47-63Hz
Efficiency:85%
AC Current: 0.4A/230V
AC Inrush Current: 40A/230V
Leakage Current< 0.5mA /240VAC
Over-load: 105%-150% hiccup mode,Auto-recovery
Over-voltage: 115%-135% Cut Off the Output,Auto-recovery
Over-temp. : Shut down O/P voltage, Auto-recovery
Working temp.: -10~ +60C° (Refer to output load derating curve)
Working Humidity:20 ~ 90% RH, non-condensing
Storage Temp.: -10~ +60C°
Storage Humidity: 10 ~ 95% RH
Isolation Resistance:I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC / 25C°/ 70% RH
Withstand Voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Safety standards: CE,RoHS,FCC,ISO9001
Ultra Thin LED Transformer 12V DC IP67
This transformer is suitable for 12V LED Lamps / Strip with a maximum consumption of 200W. Its thin size makes it very practical to connect and place in any small space.DC Voltage: 12V DC
Output:12V 16.6A 200W
Size:218*62*26mm
Weight:0.81kg
Cooling: Air
DC Voltage: 12V DC
Current : 16.6A
Ripple & Noise: 80MV
DC Adjustable Range: ±10%
Rated Voltage Voltage Tolerance: ±2.0%
Line Regulation: ±0.5%
Load Regulation: ±1% Setup,Rise Time,Hold Up Time:200ms,50ms, 20ms/230VAC AC
Voltage Range: 190-264VAC
Frequency Range: 47-63Hz
Efficiency:85%
AC Current: 0.4A/230V
AC Inrush Current: 40A/230V
Leakage Current< 0.5mA /240VAC
Over-load: 105%-150% hiccup mode,Auto-recovery
Over-voltage: 115%-135% Cut Off the Output,Auto-recovery
Over-temp. : Shut down O/P voltage, Auto-recovery
Working temp.: -10~ +60C° (Refer to output load derating curve)
Working Humidity:20 ~ 90% RH, non-condensing
Storage Temp.: -10~ +60C°
Storage Humidity: 10 ~ 95% RH
Isolation Resistance:I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC / 25C°/ 70% RH
Withstand Voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Safety standards: CE,RoHS,FCC,ISO9001
Ultra Thin LED Transformer 12V DC IP67
This transformer is suitable for 12V LED Lamps / Strip with a maximum consumption of 200W. Its thin size makes it very practical to connect and place in any small space.
Ultra Thin LED Transformer 12V DC IP67
This transformer is suitable for 12V LED Lamps / Strip with a maximum consumption of 200W. Its thin size makes it very practical to connect and place in any small space.
Ultra Thin LED Transformer 12V DC IP67
This transformer is suitable for 12V LED Lamps / Strip with a maximum consumption of 200W. Its thin size makes it very practical to connect and place in any small space.
RF 2.4G Afstandsbediening +. ( voor wifi 5 in 1 )
De afstandsbediening functietoetsen zijn samengesteld uit 1 kleur ring en 8 knoppen. Het is een 5-in-1 typeafstandsbediening, die kan worden gebruikt om DIM/CCT/RGB/RGBW/RGBCW LEDs te controleren.
Eigenschappen:
1) Werken spanning: 3V (AAA * 2);
2) Keurt RF 2.4GHz draadloze bediening, afstandsbediening afstand tot 30m en geen directionele;
3) Unieke interface, en gemakkelijk te werken;
4) RFBT02A voor RGB/RGBW/RGBCW, RFBT02B voor DIM/CCT.
5) Kom met houder, gemakkelijker toegang en het houden;
6) Twee manier voor accessoires installatie, flexibele keuze;
7) Compatibel systeem met MINI001, D002, DLV003, DLV004, DLV005, D015, D016 , controlemechanismen;
8) 3 jaar garantie.
RF 2.4G Afstandsbediening +. ( voor wifi 5 in 1 )
De afstandsbediening functietoetsen zijn samengesteld uit 1 kleur ring en 8 knoppen. Het is een 5-in-1 typeafstandsbediening, die kan worden gebruikt om DIM/CCT/RGB/RGBW/RGBCW LEDs te controleren.
Eigenschappen:
1) Werken spanning: 3V (AAA * 2);
2) Keurt RF 2.4GHz draadloze bediening, afstandsbediening afstand tot 30m en geen directionele;
3) Unieke interface, en gemakkelijk te werken;
4) RFBT02A voor RGB/RGBW/RGBCW, RFBT02B voor DIM/CCT.
5) Kom met houder, gemakkelijker toegang en het houden;
6) Twee manier voor accessoires installatie, flexibele keuze;
7) Compatibel systeem met MINI001, D002, DLV003, DLV004, DLV005, D015, D016 , controlemechanismen;
8) 3 jaar garantie.
RF 2.4G Remote control +. ( for wifi 5 in 1 )
The remote control function keys are composed of 1 colour ring and 8 buttons. It is a 5-in-1 type remote control, which can be used to control DIM/CCT/RGBW/RGBCW LEDs.
RF 2.4G Remote control +. ( for wifi 5 in 1 )
The remote control function keys are composed of 1 colour ring and 8 buttons. It is a 5-in-1 type remote control, which can be used to control DIM/CCT/RGBW/RGBCW LEDs.
RF 2.4G Remote control +. ( for wifi 5 in 1 )
The remote control function keys are composed of 1 colour ring and 8 buttons. It is a 5-in-1 type remote control, which can be used to control DIM/CCT/RGBW/RGBCW LEDs.
RGB LED Controller Touch Screen 2.4G RF DC12-24V Remote Control 6A per channel for SMD 5050 /2835/3528 RGB LED Strip light
Specification:
Item: 2.4G Touch Screen LED RGB Controller
Led type: High power LED
Color: White
Input Voltage: 12-24V DC
control Way: RGB 3 Channels
MAX charge current: 6A each color
connection mode: common anode
Controller battery: 2PCS* AAA battery (not included)
Battery is not included battery model is AAA, please buy it yourself in your local market
Control distance: 30m
Programs: 20 kinds
Remote Size: 110*52*20mm
Controller Size: 85*45*23mm
RGB LED Controller Touch Screen 2.4G RF DC12-24V Remote Control 6A per channel for SMD 5050 /2835/3528 RGB LED Strip light
Specification:
Item: 2.4G Touch Screen LED RGB Controller
Led type: High power LED
Color: White
Input Voltage: 12-24V DC
control Way: RGB 3 Channels
MAX charge current: 6A each color
connection mode: common anode
Controller battery: 2PCS* AAA battery (not included)
Battery is not included battery model is AAA, please buy it yourself in your local market
Control distance: 30m
Programs: 20 kinds
Remote Size: 110*52*20mm
Controller Size: 85*45*23mm
2.4G RGB LED Controller 3Channels 18A DC12-24V Touch Screen Remote Control for 5050 3528 RGB LED
2.4G RGB LED Controller 3Channels 18A DC12-24V Touch Screen Remote Control for 5050 3528 RGB LED
2.4G RGB LED Controller 3Channels 18A DC12-24V Touch Screen Remote Control for 5050 3528 RGB LED
The 12DC Transformer for LED Pool Lighting is ideal for LED connections with lower consumption. This source is electronically regulated at 12VDC, specially recommended for the use of LEDs. Its function is to ensure that the LED does not receive voltage and/or current surges thanks to the components it is built with.
- DC Voltage: 12V DC
- Current : 12.5A
- Ripple & Noise: 80MV
- DC Adjustable Range: ±10%
- Rated Voltage Voltage Tolerance: ±2.0%
- Line Regulation: ±0.5%
- Load Regulation: ±1% Setup,Rise Time,Hold Up Time:200ms,50ms, 20ms/230VAC AC
- Voltage Range: 85-264VAC
- Frequency Range: 47-63Hz
- Efficiency:85%
- AC Current: 0.86/115V 0.4A/230V
- AC Inrush Current: 20A/115V 40A/230V
- Leakage Current< 0.5mA /240VAC
- Over-load: 105%-150% hiccup mode,Auto-recovery
- Over-voltage: 115%-135% Cut Off the Output,Auto-recovery
- Over-temp. : Shut down O/P voltage, Auto-recovery
- Working temp.: -10~ +60C° (Refer to output load derating curve)
- Working Humidity:20 ~ 90% RH, non-condensing
- Storage Temp.: -10~ +60C°
- Storage Humidity: 10 ~ 95% RH
- Isolation Resistance:I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC / 25C°/ 70% RH
- Withstand Voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
- Safety standards: CE,RoHS,FCC,ISO9001
The 12DC Transformer for LED Pool Lighting is ideal for LED connections with lower consumption. This source is electronically regulated at 12VDC, specially recommended for the use of LEDs. Its function is to ensure that the LED does not receive voltage and/or current surges thanks to the components it is built with.
- DC Voltage: 12V DC
- Current : 12.5A
- Ripple & Noise: 80MV
- DC Adjustable Range: ±10%
- Rated Voltage Voltage Tolerance: ±2.0%
- Line Regulation: ±0.5%
- Load Regulation: ±1% Setup,Rise Time,Hold Up Time:200ms,50ms, 20ms/230VAC AC
- Voltage Range: 85-264VAC
- Frequency Range: 47-63Hz
- Efficiency:85%
- AC Current: 0.86/115V 0.4A/230V
- AC Inrush Current: 20A/115V 40A/230V
- Leakage Current< 0.5mA /240VAC
- Over-load: 105%-150% hiccup mode,Auto-recovery
- Over-voltage: 115%-135% Cut Off the Output,Auto-recovery
- Over-temp. : Shut down O/P voltage, Auto-recovery
- Working temp.: -10~ +60C° (Refer to output load derating curve)
- Working Humidity:20 ~ 90% RH, non-condensing
- Storage Temp.: -10~ +60C°
- Storage Humidity: 10 ~ 95% RH
- Isolation Resistance:I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC / 25C°/ 70% RH
- Withstand Voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
- Safety standards: CE,RoHS,FCC,ISO9001
The 12VDC Transformer for LED Pool Lighting is ideal for LED connections with lower consumption. This source is electronically regulated at 12VDC, specially recommended for the use of LEDs. Its function is to ensure that the LED does not receive voltage and/or current surges thanks to the components it is built with.
DC Output: 12V 30A 360W
Weight: 783g
Size:215*112*50mm
Cooling: Air
The 12VDC Transformer for LED Pool Lighting is ideal for LED connections with lower consumption. This source is electronically regulated at 12VDC, specially recommended for the use of LEDs. Its function is to ensure that the LED does not receive voltage and/or current surges thanks to the components it is built with.
DC Output: 12V 30A 360W
Weight: 783g
Size:215*112*50mm
Cooling: Air
The 12VDC Transformer for LED Pool Lighting is ideal for LED connections with lower consumption. This source is electronically regulated at 12VDC, specially recommended for the use of LEDs. Its function is to ensure that the LED does not receive voltage and/or current surges thanks to the components it is built with.
DC Output: 12V 30A 360W
Weight: 783g
Size:215*112*50mm
Cooling: Air
The 12DC Transformer for LED Pool Lighting is ideal for LED connections with lower consumption. This source is electronically regulated at 12VDC, specially recommended for the use of LEDs. Its function is to ensure that the LED does not receive voltage and/or current surges thanks to the components it is built with.
- DC Voltage: 12V DC
- Current : 12.5A
- Ripple & Noise: 80MV
- DC Adjustable Range: ±10%
- Rated Voltage Voltage Tolerance: ±2.0%
- Line Regulation: ±0.5%
- Load Regulation: ±1% Setup,Rise Time,Hold Up Time:200ms,50ms, 20ms/230VAC AC
- Voltage Range: 85-264VAC
- Frequency Range: 47-63Hz
- Efficiency:85%
- AC Current: 0.86/115V 0.4A/230V
- AC Inrush Current: 20A/115V 40A/230V
- Leakage Current< 0.5mA /240VAC
- Over-load: 105%-150% hiccup mode,Auto-recovery
- Over-voltage: 115%-135% Cut Off the Output,Auto-recovery
- Over-temp. : Shut down O/P voltage, Auto-recovery
- Working temp.: -10~ +60C° (Refer to output load derating curve)
- Working Humidity:20 ~ 90% RH, non-condensing
- Storage Temp.: -10~ +60C°
- Storage Humidity: 10 ~ 95% RH
- Isolation Resistance:I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC / 25C°/ 70% RH
- Withstand Voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
- Safety standards: CE,RoHS,FCC,ISO9001
The 12DC Transformer for LED Pool Lighting is ideal for LED connections with lower consumption. This source is electronically regulated at 12VDC, specially recommended for the use of LEDs. Its function is to ensure that the LED does not receive voltage and/or current surges thanks to the components it is built with.
- DC Voltage: 12V DC
- Current : 12.5A
- Ripple & Noise: 80MV
- DC Adjustable Range: ±10%
- Rated Voltage Voltage Tolerance: ±2.0%
- Line Regulation: ±0.5%
- Load Regulation: ±1% Setup,Rise Time,Hold Up Time:200ms,50ms, 20ms/230VAC AC
- Voltage Range: 85-264VAC
- Frequency Range: 47-63Hz
- Efficiency:85%
- AC Current: 0.86/115V 0.4A/230V
- AC Inrush Current: 20A/115V 40A/230V
- Leakage Current< 0.5mA /240VAC
- Over-load: 105%-150% hiccup mode,Auto-recovery
- Over-voltage: 115%-135% Cut Off the Output,Auto-recovery
- Over-temp. : Shut down O/P voltage, Auto-recovery
- Working temp.: -10~ +60C° (Refer to output load derating curve)
- Working Humidity:20 ~ 90% RH, non-condensing
- Storage Temp.: -10~ +60C°
- Storage Humidity: 10 ~ 95% RH
- Isolation Resistance:I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC / 25C°/ 70% RH
- Withstand Voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
- Safety standards: CE,RoHS,FCC,ISO9001
The 12VDC Transformer for LED Pool Lighting is ideal for LED connections with lower consumption. This source is electronically regulated at 12VDC, specially recommended for the use of LEDs. Its function is to ensure that the LED does not receive voltage and/or current surges thanks to the components it is built with.
DC Output: 12V 12.5A 240W
Weight: 470g
Size:199*109*50mm
Cooling: Air
The 12VDC Transformer for LED Pool Lighting is ideal for LED connections with lower consumption. This source is electronically regulated at 12VDC, specially recommended for the use of LEDs. Its function is to ensure that the LED does not receive voltage and/or current surges thanks to the components it is built with.
DC Output: 12V 12.5A 240W
Weight: 470g
Size:199*109*50mm
Cooling: Air
The 12VDC Transformer for LED Pool Lighting is ideal for LED connections with lower consumption. This source is electronically regulated at 12VDC, specially recommended for the use of LEDs. Its function is to ensure that the LED does not receive voltage and/or current surges thanks to the components it is built with.
DC Output: 12V 12.5A 240W
Weight: 470g
Size:199*109*50mm
Cooling: Air
This new series of plug-and-play lamps is very easy to mount and replace. The cable has a click system, so no more messing around with shrink tubing or resin.
These lamps are not in stock , they will be placed on order, and you can also get these lamps with longer cable.
Specifications
- Fully resin filled,100% waterproof
- Ultra slim design in 13 mm thickness
- 2 wire external or 4
- Size φ62*H48 mm
- Voltage : 12 / DC
- Waterproof grade: IP68
- Beam angle: 120°
- Working environment temperature : -25°C~45°C
- Wattage : 9w
- Brand leds : SMD2835(EPISTAR)
- Light colour : Warm white / RGB /
- Cable length : 2.5 metres
- Energy class : +A
- Material : STAINLESS STEEL 316L | Anti UV PC
- Option also works with wifi control system
- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours
- Two year warranty
Quality pool lights
At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.
If you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is a lot better than working out the entire installation instruction on this online shop. We will be happy to advise you.
IMPORTANT
- The product should not be tested out of the water for more than 30 seconds.
- No transformer is included.
This new series of plug-and-play lamps is very easy to mount and replace. The cable has a click system, so no more messing around with shrink tubing or resin.
These lamps are not in stock , they will be placed on order, and you can also get these lamps with longer cable.
Specifications
- Fully resin filled,100% waterproof
- Ultra slim design in 13 mm thickness
- 2 wire external or 4
- Size φ62*H48 mm
- Voltage : 12 / DC
- Waterproof grade: IP68
- Beam angle: 120°
- Working environment temperature : -25°C~45°C
- Wattage : 9w
- Brand leds : SMD2835(EPISTAR)
- Light colour : Warm white / RGB /
- Cable length : 2.5 metres
- Energy class : +A
- Material : STAINLESS STEEL 316L | Anti UV PC
- Option also works with wifi control system
- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours
- Two year warranty
Quality pool lights
At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.
If you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is a lot better than working out the entire installation instruction on this online shop. We will be happy to advise you.
IMPORTANT
- The product should not be tested out of the water for more than 30 seconds.
- No transformer is included.
This new series of plug-and-play lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
This new series of plug-and-play lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
This new series of plug-and-play lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
This new series of plug-and-play lamps is very easy to mount and replace. The cable has a click system, so no more messing around with shrink tubing or resin.
These lamps are not in stock , they will be placed on order, and you can also get these lamps with longer cable.
Specifications
- Fully resin filled,100% waterproof
- Ultra slim design in 13 mm thickness
- 2 wire external or 4
- Size φ125*H48 mm
- Voltage : 12 / DC
- Waterproof grade: IP68
- Beam angle: 120°
- Working environment temperature : -25°C~45°C
- Wattage : 9w
- Brand leds : SMD2835(EPISTAR)
- Light colour : Warm white / RGB /
- Cable length : 2.5 metres
- Energy class : +A
- Material : Fully resin filled plastic | Anti UV PC
- Option also works with wifi control system
- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours
- Two year warranty
Quality pool lights
At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.
If you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is a lot better than working out the entire installation instruction on this online shop. We will be happy to advise you.
IMPORTANT
- The product should not be tested out of the water for more than 30 seconds.
- No transformer is included.
This new series of plug-and-play lamps is very easy to mount and replace. The cable has a click system, so no more messing around with shrink tubing or resin.
These lamps are not in stock , they will be placed on order, and you can also get these lamps with longer cable.
Specifications
- Fully resin filled,100% waterproof
- Ultra slim design in 13 mm thickness
- 2 wire external or 4
- Size φ125*H48 mm
- Voltage : 12 / DC
- Waterproof grade: IP68
- Beam angle: 120°
- Working environment temperature : -25°C~45°C
- Wattage : 9w
- Brand leds : SMD2835(EPISTAR)
- Light colour : Warm white / RGB /
- Cable length : 2.5 metres
- Energy class : +A
- Material : Fully resin filled plastic | Anti UV PC
- Option also works with wifi control system
- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours
- Two year warranty
Quality pool lights
At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.
If you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is a lot better than working out the entire installation instruction on this online shop. We will be happy to advise you.
IMPORTANT
- The product should not be tested out of the water for more than 30 seconds.
- No transformer is included.
This new series of plug-and-play lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
This new series of plug-and-play lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
This new series of plug-and-play lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
Looking for an easy-to-mount light in your fibreglass pool? This model is not big but gives good light.
Available in single colours and RGB.
Specifications
- Fully resin filled, 100% waterproof
- Ultra slim design in 12 mm thickness
- 2 wire external or 4
- Size φ169*H70 mm
- Voltage : 12/24V AC/DC
- Waterproof grade: IP68
- Beam angle: 120°
- Working environment temperature : -25°C~45°C
- Wattage : 18W/25W/35W
- Brand leds : Epsper 2835
- Light colour : Warm white / RGB /
- Cable length : 2.5 metres
- Energy class : +A
- Material : Fully resin filled plastic | Anti UV PC
- Option also works with wifi control system
- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours
- Two-year warranty
Quality pool lights
At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.
If you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is a lot better than working out the entire installation instruction on this online shop. We will be happy to advise you.
IMPORTANT
- The product should not be tested out of the water for more than 30 seconds.
- No transformer is included.
Looking for an easy-to-mount light in your fibreglass pool? This model is not big but gives good light.
Available in single colours and RGB.
Specifications
- Fully resin filled, 100% waterproof
- Ultra slim design in 12 mm thickness
- 2 wire external or 4
- Size φ169*H70 mm
- Voltage : 12/24V AC/DC
- Waterproof grade: IP68
- Beam angle: 120°
- Working environment temperature : -25°C~45°C
- Wattage : 18W/25W/35W
- Brand leds : Epsper 2835
- Light colour : Warm white / RGB /
- Cable length : 2.5 metres
- Energy class : +A
- Material : Fully resin filled plastic | Anti UV PC
- Option also works with wifi control system
- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours
- Two-year warranty
Quality pool lights
At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.
If you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is a lot better than working out the entire installation instruction on this online shop. We will be happy to advise you.
IMPORTANT
- The product should not be tested out of the water for more than 30 seconds.
- No transformer is included.
Looking for an easy-to-mount light in your fibreglass pool? This model is not big but gives good light.
Available in single colours and RGB.
Looking for an easy-to-mount light in your fibreglass pool? This model is not big but gives good light.
Available in single colours and RGB.
Looking for an easy-to-mount light in your fibreglass pool? This model is not big but gives good light.
Available in single colours and RGB.
This new series of PLUG-IN lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
These lamps are not in stock , these are placed on order, and you can also get these lamps with longer cable.
Specifications
- Fully resin filled,100% waterproof
- Ultra slim design in 13 mm thickness
- 2 wire external or 4
- Size 98*H75 mm
- Voltage : 12/24V AC/DC
- Waterproof grade: IP68
- Beam angle: 120°
- Working environment temperature : -25°C~45°C
- Wattage : 9W
- Brand leds : Epsper 2835
- Light colour : Warm white / RGB / RGB+W
- Cable length : 2.5 metres
- Energy class : +A
- Material : Fully resin filled plastic | Anti UV PC
- Option also works with wifi control system
- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours
- Three year warranty
Quality pool lights
At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.
If you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is a lot better than working out the entire installation instruction on this online shop. We will be happy to advise you.
IMPORTANT
- The product should not be tested out of the water for more than 30 seconds.
- No transformer is included.
This new series of PLUG-IN lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
These lamps are not in stock , these are placed on order, and you can also get these lamps with longer cable.
Specifications
- Fully resin filled,100% waterproof
- Ultra slim design in 13 mm thickness
- 2 wire external or 4
- Size 98*H75 mm
- Voltage : 12/24V AC/DC
- Waterproof grade: IP68
- Beam angle: 120°
- Working environment temperature : -25°C~45°C
- Wattage : 9W
- Brand leds : Epsper 2835
- Light colour : Warm white / RGB / RGB+W
- Cable length : 2.5 metres
- Energy class : +A
- Material : Fully resin filled plastic | Anti UV PC
- Option also works with wifi control system
- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours
- Three year warranty
Quality pool lights
At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.
If you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is a lot better than working out the entire installation instruction on this online shop. We will be happy to advise you.
IMPORTANT
- The product should not be tested out of the water for more than 30 seconds.
- No transformer is included.
This new series of PLUG-IN lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
This new series of PLUG-IN lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
This new series of PLUG-IN lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
This new series of plug-and-play lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
These lamps are not in stock , these are placed on order, and you can also get these lamps with longer cable.
Specifications
- Fully resin filled,100% waterproof
- Ultra slim design in 13 mm thickness
- 2 wire external or 4 -5
- Size 262*H75 mm
- Voltage : 12/24V AC/DC
- Waterproof grade: IP68
- Beam angle: 120°
- Working environment temperature : -25°C~45°C
- Wattage : 18W/25W/35W
- Brand leds : Epsper 2835
- Light colour : Warm white / RGB / RGB+W
- Cable length : 2.5 metres
- Energy class : +A
- Material : Fully resin filled plastic | Anti UV PC
- Option also works with wifi control system
- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours
- Three year warranty
Quality pool lights
At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.
If you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is a lot better than working out the entire installation instruction on this online shop. We will be happy to advise you.
IMPORTANT
- The product should not be tested out of the water for more than 30 seconds.
- No transformer is included.
This new series of plug-and-play lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
These lamps are not in stock , these are placed on order, and you can also get these lamps with longer cable.
Specifications
- Fully resin filled,100% waterproof
- Ultra slim design in 13 mm thickness
- 2 wire external or 4 -5
- Size 262*H75 mm
- Voltage : 12/24V AC/DC
- Waterproof grade: IP68
- Beam angle: 120°
- Working environment temperature : -25°C~45°C
- Wattage : 18W/25W/35W
- Brand leds : Epsper 2835
- Light colour : Warm white / RGB / RGB+W
- Cable length : 2.5 metres
- Energy class : +A
- Material : Fully resin filled plastic | Anti UV PC
- Option also works with wifi control system
- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours
- Three year warranty
Quality pool lights
At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.
If you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is a lot better than working out the entire installation instruction on this online shop. We will be happy to advise you.
IMPORTANT
- The product should not be tested out of the water for more than 30 seconds.
- No transformer is included.
This new series of plug-and-play lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
This new series of plug-and-play lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.
This new series of plug-and-play lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.