New products
PROLINE IP68 L SERIES — 24V Neon LED Strip for Swimming Pools
The PROLINE IP68 L SERIES is the professional neon LED strip for swimming pools with high demands on lighting, durability and waterproofing. This 24V neon LED strip is specially developed for large swimming pools and can be supplied in exceptionally long lengths — ideal for pool cages, pool edges, underwater lighting and decorative light lines around the pool.
With an IP68 rating and permanent submersion up to 2 metres depth, this strip ranks among the most waterproof LED solutions on the market. Thanks to the clean neon effect without visible LED dots and availability in single colour, RGB and RGB+W, the PROLINE L SERIES offers maximum design freedom for both commercial and private pool projects.
What is the PROLINE IP68 L SERIES suitable for?
This professional swimming pool LED strip is ideally suited for:
• Underwater lighting in large indoor and outdoor swimming pools
• Lighting of pool cages and pool enclosures
• Accent lighting along pool edges and overflow edges
• Decorative light lines in spas, wellness centres and hotel pools
• Projects requiring extra-long strips without soldered connections
What makes the L SERIES special?
The L SERIES is specifically designed for large pool projects. Where standard LED strips are limited in deliverable length, the L SERIES offers the ability to supply significantly longer runs without loss of quality or voltage drop. This makes the strip particularly suitable for professional installers and projects with high demands on light continuity.
The strip is available as a single colour, in RGB and in RGB+W — for those who want to create colour changes and mood scenes in and around the pool.
Clean Neon Effect and Maximum Waterproofing
The PROLINE IP68 L SERIES is made from high-quality silicone and delivers a smooth, flowing neon glow without visible LED dots. This gives a clean and professional result, even at longer distances.
Thanks to the IP68 waterproof rating, the strip is suitable for permanent submersion up to 2 metres depth. The silicone material is fully resistant to chlorine and salt water, ensuring the lighting remains reliable and bright even after years of intensive use.
Easy Installation with Aluminium Profiles
The PROLINE IP68 L SERIES is horizontally flexible with a minimum bending diameter of 200 mm, making installation in curved constructions and round pool edges straightforward.
The strip can be glued, but we recommend using our special aluminium profiles. These profiles ensure a clean, straight line of light and a professional finish. They also provide extra protection and simplify any future maintenance. An aluminium profile makes the difference between ‘good’ and ‘perfect’ in your pool project.
Technical Specifications
|
Input voltage |
DC 24V |
|
Power consumption |
15 W per metre |
|
IP rating |
IP68 — permanently submerged up to 2 m |
|
Material |
High-quality silicone |
|
CRI |
90 |
|
Luminous flux warm white |
480 lumen per metre |
|
Luminous flux RGB |
300 lumen per metre |
|
Luminous flux RGB+W |
365 lumen per metre |
|
Operating temperature |
-25°C to +60°C |
|
Min. bending diameter |
200 mm |
|
Cross-section |
16 × 16 mm |
|
Version |
Single colour / RGB / RGB+W |
|
Certification |
CE — UL — RoHS |
|
Lifespan |
Up to 50,000 hours |
|
Warranty |
3 years |
In short: why the PROLINE IP68 L SERIES?
• IP68 — permanently submerged up to 2 metres depth
• Designed for large pools: available in extra-long lengths
• Smooth neon glow without visible LED dots
• 100% resistant to chlorine and salt water
• Available in single colour, RGB and RGB+W
• Luminous flux: 480 lm (warm white) — 365 lm (RGB+W) — 300 lm (RGB) per metre
• Safe 24V DC power supply
• CRI 90 for true-to-life colour rendering
• Lifespan up to 50,000 hours — 3-year warranty
• Available with special aluminium mounting profiles
• CE, UL and RoHS certified
Interested in the PROLINE IP68 L SERIES or need tailored advice for your pool project? Contact Xpro Pool Lighting.
www.xpropool.com • Specialist in professional LED lighting for swimming pools, saunas and outdoor spaces
PROLINE IP68 L SERIES — 24V Neon LED Strip for Swimming Pools
The PROLINE IP68 L SERIES is the professional neon LED strip for swimming pools with high demands on lighting, durability and waterproofing. This 24V neon LED strip is specially developed for large swimming pools and can be supplied in exceptionally long lengths — ideal for pool cages, pool edges, underwater lighting and decorative light lines around the pool.
With an IP68 rating and permanent submersion up to 2 metres depth, this strip ranks among the most waterproof LED solutions on the market. Thanks to the clean neon effect without visible LED dots and availability in single colour, RGB and RGB+W, the PROLINE L SERIES offers maximum design freedom for both commercial and private pool projects.
What is the PROLINE IP68 L SERIES suitable for?
This professional swimming pool LED strip is ideally suited for:
• Underwater lighting in large indoor and outdoor swimming pools
• Lighting of pool cages and pool enclosures
• Accent lighting along pool edges and overflow edges
• Decorative light lines in spas, wellness centres and hotel pools
• Projects requiring extra-long strips without soldered connections
What makes the L SERIES special?
The L SERIES is specifically designed for large pool projects. Where standard LED strips are limited in deliverable length, the L SERIES offers the ability to supply significantly longer runs without loss of quality or voltage drop. This makes the strip particularly suitable for professional installers and projects with high demands on light continuity.
The strip is available as a single colour, in RGB and in RGB+W — for those who want to create colour changes and mood scenes in and around the pool.
Clean Neon Effect and Maximum Waterproofing
The PROLINE IP68 L SERIES is made from high-quality silicone and delivers a smooth, flowing neon glow without visible LED dots. This gives a clean and professional result, even at longer distances.
Thanks to the IP68 waterproof rating, the strip is suitable for permanent submersion up to 2 metres depth. The silicone material is fully resistant to chlorine and salt water, ensuring the lighting remains reliable and bright even after years of intensive use.
Easy Installation with Aluminium Profiles
The PROLINE IP68 L SERIES is horizontally flexible with a minimum bending diameter of 200 mm, making installation in curved constructions and round pool edges straightforward.
The strip can be glued, but we recommend using our special aluminium profiles. These profiles ensure a clean, straight line of light and a professional finish. They also provide extra protection and simplify any future maintenance. An aluminium profile makes the difference between ‘good’ and ‘perfect’ in your pool project.
Technical Specifications
|
Input voltage |
DC 24V |
|
Power consumption |
15 W per metre |
|
IP rating |
IP68 — permanently submerged up to 2 m |
|
Material |
High-quality silicone |
|
CRI |
90 |
|
Luminous flux warm white |
480 lumen per metre |
|
Luminous flux RGB |
300 lumen per metre |
|
Luminous flux RGB+W |
365 lumen per metre |
|
Operating temperature |
-25°C to +60°C |
|
Min. bending diameter |
200 mm |
|
Cross-section |
16 × 16 mm |
|
Version |
Single colour / RGB / RGB+W |
|
Certification |
CE — UL — RoHS |
|
Lifespan |
Up to 50,000 hours |
|
Warranty |
3 years |
In short: why the PROLINE IP68 L SERIES?
• IP68 — permanently submerged up to 2 metres depth
• Designed for large pools: available in extra-long lengths
• Smooth neon glow without visible LED dots
• 100% resistant to chlorine and salt water
• Available in single colour, RGB and RGB+W
• Luminous flux: 480 lm (warm white) — 365 lm (RGB+W) — 300 lm (RGB) per metre
• Safe 24V DC power supply
• CRI 90 for true-to-life colour rendering
• Lifespan up to 50,000 hours — 3-year warranty
• Available with special aluminium mounting profiles
• CE, UL and RoHS certified
Interested in the PROLINE IP68 L SERIES or need tailored advice for your pool project? Contact Xpro Pool Lighting.
www.xpropool.com • Specialist in professional LED lighting for swimming pools, saunas and outdoor spaces
The PROLINE IP68 L SERIES is the professional neon LED strip for swimming pools with high demands on lighting, durability and waterproofing. This 24V neon LED strip is specially developed for large swimming pools and can be supplied in exceptionally long lengths — ideal for pool cages, pool edges, underwater lighting and decorative light lines around the pool.
The PROLINE IP68 L SERIES is the professional neon LED strip for swimming pools with high demands on lighting, durability and waterproofing. This 24V neon LED strip is specially developed for large swimming pools and can be supplied in exceptionally long lengths — ideal for pool cages, pool edges, underwater lighting and decorative light lines around the pool.
The PROLINE IP68 L SERIES is the professional neon LED strip for swimming pools with high demands on lighting, durability and waterproofing. This 24V neon LED strip is specially developed for large swimming pools and can be supplied in exceptionally long lengths — ideal for pool cages, pool edges, underwater lighting and decorative light lines around the pool.
Proline Ultra-Thin Pool Light 220 × 19 mm — 316L Stainless Steel — Nicheless
18W – 25W – 35W | IP68 | 12V AC/DC | Warm White – RGB – RGBW
The Proline ultra-thin nicheless pool light from XPRO POOL is the ideal LED pool light for modern swimming pools where clean design and easy installation are key. With a diameter of 220 mm and an exceptional thickness of just 19 mm — the thinnest in its class — this lamp fits directly into a 1.5 inch threaded fitting, with no niche required. No complex installation, no special construction — perfect for both new pools and renovations. Available in 18W, 25W and 35W with a choice of warm white, RGB and RGBW lighting.
Light Output per Version
The Proline pool light delivers high light output across all three wattages and all light options. The 35W version produces up to 3,183 lumens warm white:
|
Version |
18W |
25W |
35W |
|
Warm white |
1.032 lm |
2.325 lm |
3.183 lm |
|
RGB |
972 lm |
1.325 lm |
1.725 lm |
|
RGBW |
1.098 lm |
1.475 lm |
1.995 lm |
The lamp uses Epistar 2835 LED chips — reliable, energy-efficient and with a long lifespan of up to ±40,000 hours. The wide beam angle of 120° ensures excellent, even light distribution throughout the entire pool.
Nicheless — Easy Installation Without a Niche
The greatest advantage of the Proline ultra-thin pool light is its nicheless design. The lamp mounts directly via a standard 1.5 inch threaded fitting in the pool wall — without a special niche, housing or extra construction work. This makes it ideal for renovation of existing pools where there is no space or budget for expensive structural modifications.
Warm White, RGB or RGBW — Your Choice
The Proline pool light is available in three light options for every atmosphere and application:
• Warm white — for timeless, atmospheric and relaxing pool lighting
• RGB — for dynamic colour effects and customisable mood lighting
• RGBW — for the perfect combination of colour and bright white light in one lamp
Flexible Connection Options
The lamp is available with various cable systems for maximum compatibility:
|
System |
Application |
|
2-wire |
Single colour (warm white) or RGB switching system |
|
4- or 5-wire |
RGB controller systems and RGBW professional control |
This makes the lamp fully compatible with pool controllers, Wi-Fi systems and smart controls. Easy to integrate into existing and new installations.
Why Choose an External Controller?
We recommend an external control system over a built-in remote. This offers significant advantages:
• Better synchronisation of multiple pool lights
• More reliable system with fewer faults
• Easily expandable to smart home and Wi-Fi systems
• Flexible to upgrade without replacing the lamp
IP68 — Fully Waterproof
The interior of the Proline pool light is completely filled with resin — 100% waterproof and suitable for permanent underwater installation. The lamp offers maximum protection against pool chemicals, UV radiation, temperature fluctuations and prolonged contact with water.
High-Quality Materials
The Proline range is built for long-term professional use in swimming pools:
• Front: 316L stainless steel — luxurious appearance, corrosion-resistant and wear-resistant
• Housing: UV-resistant PC plastic — resistant to UV radiation and discolouration
• Interior: completely resin-filled — 100% waterproof with optimal protection of internal components
Installation Advice
For optimal lighting performance, we recommend installing the lamp at approximately 55 to 70 cm below the top edge of the pool. At this depth, the water is evenly and optimally illuminated. Please note that the lamp may only be tested outside the water for a maximum of 3 minutes. The transformer is not included as standard.
|
IP68 |
RVS 316L |
Epistar |
UV-PC |
CE |
Suitable For
The Proline ultra-thin pool light is ideal for:
• New pools — private and commercial
• Renovation of existing pools without a niche
• Inground, overflow and infinity pools
• Spas, hot tubs and wellness environments
• Public pools and sports facilities
• Hotel pools, resorts and luxury villa projects
Benefits and Features
✔ Ultra-thin design of just 19 mm — the thinnest in its class
✔ Nicheless installation via standard 1.5 inch threaded fitting
✔ Suitable for renovation without structural modifications
✔ Power: 18W / 25W / 35W (your choice)
✔ Light output up to 3,183 lm (warm white, 35W)
✔ Choice of warm white, RGB and RGBW lighting
✔ Wide 120° beam angle for even light distribution
✔ Epistar 2835 LED chips — lifespan up to ±40,000 hours
✔ IP68 — fully waterproof, resin-filled
✔ 316L stainless steel front — luxurious appearance
✔ Compatible with controllers, Wi-Fi and smart systems
✔ Cable length 2.5 metres
✔ 2-year warranty
Technical Specifications
|
Dimensions |
220 × 19 mm |
|
Voltage |
AC / DC 12V |
|
Beam angle |
120° |
|
Power |
18W / 25W / 35W |
|
LED type |
Epistar 2835 |
|
Light colours |
Warm white / RGB / RGBW |
|
Light output warm white |
18W: 1,032 lm — 25W: 2,325 lm — 35W: 3,183 lm |
|
Light output RGB |
18W: 972 lm — 25W: 1,325 lm — 35W: 1,725 lm |
|
Light output RGBW |
18W: 1,098 lm — 25W: 1,475 lm — 35W: 1,995 lm |
|
Cable length |
2.5 metres |
|
Connection |
1.5 inch threaded fitting (nicheless) |
|
Cable system |
2-wire / 4- or 5-wire |
|
Front material |
316L stainless steel |
|
Housing material |
UV-resistant PC |
|
Interior |
Completely resin-filled |
|
Operating temperature |
-25°C to +45°C |
|
IP rating |
IP68 — fully waterproof |
|
Lifespan |
Up to ±40,000 hours |
|
Warranty |
2 years |
Questions about installation or the right controller? Contact us at info@xpropool.com — our team is happy to provide professional advice.
www.xpropool.com • Specialist in professional LED pool lighting, fountain lighting and outdoor lighting
Proline Ultra-Thin Pool Light 220 × 19 mm — 316L Stainless Steel — Nicheless
18W – 25W – 35W | IP68 | 12V AC/DC | Warm White – RGB – RGBW
The Proline ultra-thin nicheless pool light from XPRO POOL is the ideal LED pool light for modern swimming pools where clean design and easy installation are key. With a diameter of 220 mm and an exceptional thickness of just 19 mm — the thinnest in its class — this lamp fits directly into a 1.5 inch threaded fitting, with no niche required. No complex installation, no special construction — perfect for both new pools and renovations. Available in 18W, 25W and 35W with a choice of warm white, RGB and RGBW lighting.
Light Output per Version
The Proline pool light delivers high light output across all three wattages and all light options. The 35W version produces up to 3,183 lumens warm white:
|
Version |
18W |
25W |
35W |
|
Warm white |
1.032 lm |
2.325 lm |
3.183 lm |
|
RGB |
972 lm |
1.325 lm |
1.725 lm |
|
RGBW |
1.098 lm |
1.475 lm |
1.995 lm |
The lamp uses Epistar 2835 LED chips — reliable, energy-efficient and with a long lifespan of up to ±40,000 hours. The wide beam angle of 120° ensures excellent, even light distribution throughout the entire pool.
Nicheless — Easy Installation Without a Niche
The greatest advantage of the Proline ultra-thin pool light is its nicheless design. The lamp mounts directly via a standard 1.5 inch threaded fitting in the pool wall — without a special niche, housing or extra construction work. This makes it ideal for renovation of existing pools where there is no space or budget for expensive structural modifications.
Warm White, RGB or RGBW — Your Choice
The Proline pool light is available in three light options for every atmosphere and application:
• Warm white — for timeless, atmospheric and relaxing pool lighting
• RGB — for dynamic colour effects and customisable mood lighting
• RGBW — for the perfect combination of colour and bright white light in one lamp
Flexible Connection Options
The lamp is available with various cable systems for maximum compatibility:
|
System |
Application |
|
2-wire |
Single colour (warm white) or RGB switching system |
|
4- or 5-wire |
RGB controller systems and RGBW professional control |
This makes the lamp fully compatible with pool controllers, Wi-Fi systems and smart controls. Easy to integrate into existing and new installations.
Why Choose an External Controller?
We recommend an external control system over a built-in remote. This offers significant advantages:
• Better synchronisation of multiple pool lights
• More reliable system with fewer faults
• Easily expandable to smart home and Wi-Fi systems
• Flexible to upgrade without replacing the lamp
IP68 — Fully Waterproof
The interior of the Proline pool light is completely filled with resin — 100% waterproof and suitable for permanent underwater installation. The lamp offers maximum protection against pool chemicals, UV radiation, temperature fluctuations and prolonged contact with water.
High-Quality Materials
The Proline range is built for long-term professional use in swimming pools:
• Front: 316L stainless steel — luxurious appearance, corrosion-resistant and wear-resistant
• Housing: UV-resistant PC plastic — resistant to UV radiation and discolouration
• Interior: completely resin-filled — 100% waterproof with optimal protection of internal components
Installation Advice
For optimal lighting performance, we recommend installing the lamp at approximately 55 to 70 cm below the top edge of the pool. At this depth, the water is evenly and optimally illuminated. Please note that the lamp may only be tested outside the water for a maximum of 3 minutes. The transformer is not included as standard.
|
IP68 |
RVS 316L |
Epistar |
UV-PC |
CE |
Suitable For
The Proline ultra-thin pool light is ideal for:
• New pools — private and commercial
• Renovation of existing pools without a niche
• Inground, overflow and infinity pools
• Spas, hot tubs and wellness environments
• Public pools and sports facilities
• Hotel pools, resorts and luxury villa projects
Benefits and Features
✔ Ultra-thin design of just 19 mm — the thinnest in its class
✔ Nicheless installation via standard 1.5 inch threaded fitting
✔ Suitable for renovation without structural modifications
✔ Power: 18W / 25W / 35W (your choice)
✔ Light output up to 3,183 lm (warm white, 35W)
✔ Choice of warm white, RGB and RGBW lighting
✔ Wide 120° beam angle for even light distribution
✔ Epistar 2835 LED chips — lifespan up to ±40,000 hours
✔ IP68 — fully waterproof, resin-filled
✔ 316L stainless steel front — luxurious appearance
✔ Compatible with controllers, Wi-Fi and smart systems
✔ Cable length 2.5 metres
✔ 2-year warranty
Technical Specifications
|
Dimensions |
220 × 19 mm |
|
Voltage |
AC / DC 12V |
|
Beam angle |
120° |
|
Power |
18W / 25W / 35W |
|
LED type |
Epistar 2835 |
|
Light colours |
Warm white / RGB / RGBW |
|
Light output warm white |
18W: 1,032 lm — 25W: 2,325 lm — 35W: 3,183 lm |
|
Light output RGB |
18W: 972 lm — 25W: 1,325 lm — 35W: 1,725 lm |
|
Light output RGBW |
18W: 1,098 lm — 25W: 1,475 lm — 35W: 1,995 lm |
|
Cable length |
2.5 metres |
|
Connection |
1.5 inch threaded fitting (nicheless) |
|
Cable system |
2-wire / 4- or 5-wire |
|
Front material |
316L stainless steel |
|
Housing material |
UV-resistant PC |
|
Interior |
Completely resin-filled |
|
Operating temperature |
-25°C to +45°C |
|
IP rating |
IP68 — fully waterproof |
|
Lifespan |
Up to ±40,000 hours |
|
Warranty |
2 years |
Questions about installation or the right controller? Contact us at info@xpropool.com — our team is happy to provide professional advice.
www.xpropool.com • Specialist in professional LED pool lighting, fountain lighting and outdoor lighting
The Proline ultra-thin nicheless pool light from XPRO POOL is the ideal LED pool light for modern swimming pools where clean design and easy installation are key. With a diameter of 220 mm and an exceptional thickness of just 19 mm — the thinnest in its class — this lamp fits directly into a 1.5 inch threaded fitting, with no niche required. No complex installation, no special construction — perfect for both new pools and renovations. Available in 18W, 25W and 35W with a choice of warm white, RGB and RGBW lighting.
The Proline ultra-thin nicheless pool light from XPRO POOL is the ideal LED pool light for modern swimming pools where clean design and easy installation are key. With a diameter of 220 mm and an exceptional thickness of just 19 mm — the thinnest in its class — this lamp fits directly into a 1.5 inch threaded fitting, with no niche required. No complex installation, no special construction — perfect for both new pools and renovations. Available in 18W, 25W and 35W with a choice of warm white, RGB and RGBW lighting.
The Proline ultra-thin nicheless pool light from XPRO POOL is the ideal LED pool light for modern swimming pools where clean design and easy installation are key. With a diameter of 220 mm and an exceptional thickness of just 19 mm — the thinnest in its class — this lamp fits directly into a 1.5 inch threaded fitting, with no niche required. No complex installation, no special construction — perfect for both new pools and renovations. Available in 18W, 25W and 35W with a choice of warm white, RGB and RGBW lighting.
Recessed Ground Spotlight Ø120 mm — 15W — 3000K Warm White — IP67
AC100–240V | Cree COB LED | 24° or 36° | SS304 + Aluminium
The XPRO Garden Lights recessed ground spotlight Ø120 mm is a professional and durable LED ground light for outdoor use, designed for direct connection to mains voltage AC100–240V (220–240V). No transformer required — connects directly to an existing outdoor socket or garden circuit. Equipped with a Cree COB LED chip and available with a beam angle of 24° or 36°, this spot is ideal for precisely lighting trees, facades, driveways, garden paths and terraces. The warm 3000K light creates an atmospheric and inviting ambiance in any outdoor space.
|
IP67 |
Cree COB |
3000K |
CRI ≥80 |
AC220V |
3 jaar |
Powerful Cree COB Lighting on Mains Voltage
The recessed ground spotlight features a Cree COB LED chip (Chip-on-Board) — one of the most reliable and efficient LED technologies on the market. COB technology combines multiple LED chips into one unit, providing even light output, less heat generation and a longer lifespan. With a CRI ≥80, colours in the garden and on the facade are rendered naturally — highly important for decorative outdoor lighting.
Choice of 24° or 36° Beam Angle
The spot is available with two beam angles, allowing you to match the light beam to the specific application:
|
Angle |
Ideal for |
|
24° |
Narrow, focused beam — for tree lighting, facades and architectural accents at a distance |
|
36° |
Slightly wider beam — for garden paths, terraces, low shrubs and general garden lighting |
Warm White 3000K — Atmospheric Outdoor Lighting
The light colour of 3000K warm white is the ideal choice for atmospheric and relaxing outdoor lighting. This warm light approximates the colour temperature of traditional incandescent lamps and gives an inviting, cosy appearance to your garden, driveway and terrace — without the cold, sharp tone of daylight LED.
Direct Mains Connection — No Transformer Required
A major practical advantage of this ground spotlight is direct connection to AC100–240V mains voltage (220–240V in Europe). No separate transformer or driver is needed — simply connect to an existing garden circuit or outdoor socket. This makes installation simpler, cheaper and more reliable.
IP67 — Fully Weatherproof
With an IP67 protection rating, this ground spotlight is fully resistant to rain, dust, splashing water and temporary submersion. Suitable for permanent outdoor use in all weather conditions — from heavy rain to frost. The combination of a SS304 stainless steel cover ring and aluminium housing not only provides a luxurious appearance but also optimal heat dissipation and a long lifespan.
Easy Installation
The spot has a cutout size of 110 × 157 mm and comes with a 30 cm rubber waterproof cable (2 × 0.75 mm²). The waterproof cable is specially designed for in-ground use and provides extra protection against moisture and water. The overall dimensions of the spot are 120 × 160 mm.
Durable Materials
The XPRO Garden Lights ground spotlight is made from professional outdoor materials:
• Cover ring: SS304 stainless steel — corrosion-resistant and wear-resistant for intensive outdoor use
• Lamp body: aluminium — lightweight, strong and excellent heat dissipation for long LED lifespan
• Cable: 30 cm rubber waterproof cable — specially designed for in-ground and wet environments
Applications
The XPRO recessed ground spotlight is ideal for the following outdoor applications:
• Driveway lighting — safe and atmospheric illumination of driveways and entrances
• Garden and footpaths
• Terraces and outdoor living areas
• Facade and wall accent lighting
• Tree uplighting
• Architectural garden lighting and decorative spots
• Commercial outdoor projects — hotels, resorts and public spaces
Benefits and Features
✔ Direct mains connection (AC100–240V) — no transformer required
✔ Professional Cree COB LED chip for even, powerful lighting
✔ Warm white 3000K — atmospheric appearance
✔ CRI ≥80 for true-to-life colour rendering
✔ Choice of 24° or 36° beam angle
✔ IP67 — fully weatherproof for permanent outdoor use
✔ SS304 stainless steel cover ring + aluminium housing
✔ Product size: 120 × 160 mm | Cutout size: 110 × 157 mm
✔ 30 cm rubber waterproof cable (2 × 0.75 mm²)
✔ Suitable for private and professional use
✔ 3-year warranty
Technical Specifications
|
Product size |
120 × 160 mm |
|
Cutout size |
110 × 157 mm |
|
Power |
15W |
|
LED type |
Cree COB |
|
Light colour |
3000K warm white |
|
CRI |
≥80 |
|
Beam angle |
24° or 36° |
|
Voltage |
AC100–240V (suitable for 220–240V) |
|
IP rating |
IP67 |
|
Cover ring material |
SS304 stainless steel |
|
Housing material |
Aluminium |
|
Cable |
30 cm — 2 × 0.75 mm² rubber waterproof |
|
Warranty |
3 years |
Questions about this product or help choosing the right beam angle? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED outdoor, garden and pool lighting
Recessed Ground Spotlight Ø120 mm — 15W — 3000K Warm White — IP67
AC100–240V | Cree COB LED | 24° or 36° | SS304 + Aluminium
The XPRO Garden Lights recessed ground spotlight Ø120 mm is a professional and durable LED ground light for outdoor use, designed for direct connection to mains voltage AC100–240V (220–240V). No transformer required — connects directly to an existing outdoor socket or garden circuit. Equipped with a Cree COB LED chip and available with a beam angle of 24° or 36°, this spot is ideal for precisely lighting trees, facades, driveways, garden paths and terraces. The warm 3000K light creates an atmospheric and inviting ambiance in any outdoor space.
|
IP67 |
Cree COB |
3000K |
CRI ≥80 |
AC220V |
3 jaar |
Powerful Cree COB Lighting on Mains Voltage
The recessed ground spotlight features a Cree COB LED chip (Chip-on-Board) — one of the most reliable and efficient LED technologies on the market. COB technology combines multiple LED chips into one unit, providing even light output, less heat generation and a longer lifespan. With a CRI ≥80, colours in the garden and on the facade are rendered naturally — highly important for decorative outdoor lighting.
Choice of 24° or 36° Beam Angle
The spot is available with two beam angles, allowing you to match the light beam to the specific application:
|
Angle |
Ideal for |
|
24° |
Narrow, focused beam — for tree lighting, facades and architectural accents at a distance |
|
36° |
Slightly wider beam — for garden paths, terraces, low shrubs and general garden lighting |
Warm White 3000K — Atmospheric Outdoor Lighting
The light colour of 3000K warm white is the ideal choice for atmospheric and relaxing outdoor lighting. This warm light approximates the colour temperature of traditional incandescent lamps and gives an inviting, cosy appearance to your garden, driveway and terrace — without the cold, sharp tone of daylight LED.
Direct Mains Connection — No Transformer Required
A major practical advantage of this ground spotlight is direct connection to AC100–240V mains voltage (220–240V in Europe). No separate transformer or driver is needed — simply connect to an existing garden circuit or outdoor socket. This makes installation simpler, cheaper and more reliable.
IP67 — Fully Weatherproof
With an IP67 protection rating, this ground spotlight is fully resistant to rain, dust, splashing water and temporary submersion. Suitable for permanent outdoor use in all weather conditions — from heavy rain to frost. The combination of a SS304 stainless steel cover ring and aluminium housing not only provides a luxurious appearance but also optimal heat dissipation and a long lifespan.
Easy Installation
The spot has a cutout size of 110 × 157 mm and comes with a 30 cm rubber waterproof cable (2 × 0.75 mm²). The waterproof cable is specially designed for in-ground use and provides extra protection against moisture and water. The overall dimensions of the spot are 120 × 160 mm.
Durable Materials
The XPRO Garden Lights ground spotlight is made from professional outdoor materials:
• Cover ring: SS304 stainless steel — corrosion-resistant and wear-resistant for intensive outdoor use
• Lamp body: aluminium — lightweight, strong and excellent heat dissipation for long LED lifespan
• Cable: 30 cm rubber waterproof cable — specially designed for in-ground and wet environments
Applications
The XPRO recessed ground spotlight is ideal for the following outdoor applications:
• Driveway lighting — safe and atmospheric illumination of driveways and entrances
• Garden and footpaths
• Terraces and outdoor living areas
• Facade and wall accent lighting
• Tree uplighting
• Architectural garden lighting and decorative spots
• Commercial outdoor projects — hotels, resorts and public spaces
Benefits and Features
✔ Direct mains connection (AC100–240V) — no transformer required
✔ Professional Cree COB LED chip for even, powerful lighting
✔ Warm white 3000K — atmospheric appearance
✔ CRI ≥80 for true-to-life colour rendering
✔ Choice of 24° or 36° beam angle
✔ IP67 — fully weatherproof for permanent outdoor use
✔ SS304 stainless steel cover ring + aluminium housing
✔ Product size: 120 × 160 mm | Cutout size: 110 × 157 mm
✔ 30 cm rubber waterproof cable (2 × 0.75 mm²)
✔ Suitable for private and professional use
✔ 3-year warranty
Technical Specifications
|
Product size |
120 × 160 mm |
|
Cutout size |
110 × 157 mm |
|
Power |
15W |
|
LED type |
Cree COB |
|
Light colour |
3000K warm white |
|
CRI |
≥80 |
|
Beam angle |
24° or 36° |
|
Voltage |
AC100–240V (suitable for 220–240V) |
|
IP rating |
IP67 |
|
Cover ring material |
SS304 stainless steel |
|
Housing material |
Aluminium |
|
Cable |
30 cm — 2 × 0.75 mm² rubber waterproof |
|
Warranty |
3 years |
Questions about this product or help choosing the right beam angle? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED outdoor, garden and pool lighting
The XPRO Garden Lights recessed ground spotlight Ø120 mm is a professional and durable LED ground light for outdoor use, designed for direct connection to mains voltage AC100–240V (220–240V). No transformer required — connects directly to an existing outdoor socket or garden circuit. Equipped with a Cree COB LED chip and available with a beam angle of 24° or 36°, this spot is ideal for precisely lighting trees, facades, driveways, garden paths and terraces. The warm 3000K light creates an atmospheric and inviting ambiance in any outdoor space.
The XPRO Garden Lights recessed ground spotlight Ø120 mm is a professional and durable LED ground light for outdoor use, designed for direct connection to mains voltage AC100–240V (220–240V). No transformer required — connects directly to an existing outdoor socket or garden circuit. Equipped with a Cree COB LED chip and available with a beam angle of 24° or 36°, this spot is ideal for precisely lighting trees, facades, driveways, garden paths and terraces. The warm 3000K light creates an atmospheric and inviting ambiance in any outdoor space.
The XPRO Garden Lights recessed ground spotlight Ø120 mm is a professional and durable LED ground light for outdoor use, designed for direct connection to mains voltage AC100–240V (220–240V). No transformer required — connects directly to an existing outdoor socket or garden circuit. Equipped with a Cree COB LED chip and available with a beam angle of 24° or 36°, this spot is ideal for precisely lighting trees, facades, driveways, garden paths and terraces. The warm 3000K light creates an atmospheric and inviting ambiance in any outdoor space.
Recessed Ground Spotlight Ø100 mm — 12W — 3000K Warm White — IP67
AC100–240V | Cree COB LED | 24° or 36° | SS304 + Aluminium
The XPRO Garden Lights recessed ground spotlight Ø100 mm is a professional and compact LED ground light for durable outdoor use on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit or outdoor socket. Equipped with a Cree COB LED chip and available with a beam angle of 24° or 36°, this compact spot is ideal for precisely lighting trees, facades, driveways, garden paths and terraces. The warm 3000K light creates an atmospheric and inviting ambiance in any outdoor space.
|
IP67 |
Cree COB |
3000K |
CRI ≥80 |
AC220V |
3 jaar |
Powerful Cree COB Lighting on Mains Voltage
The recessed ground spotlight features a Cree COB LED chip (Chip-on-Board) — one of the most reliable and efficient LED technologies on the market. COB technology combines multiple LED chips into one unit for even light output, less heat generation and a longer lifespan. With a CRI ≥80, colours in the garden and on the facade are rendered naturally — highly important for decorative outdoor lighting.
Choice of 24° or 36° Beam Angle
The spot is available with two beam angles, allowing you to match the light beam to the specific application:
|
Angle |
Ideal for |
|
24° |
Narrow, focused beam — for tree lighting, facades and architectural accents at a distance |
|
36° |
Slightly wider beam — for garden paths, terraces, low shrubs and general garden lighting |
Warm White 3000K — Atmospheric Outdoor Lighting
The light colour of 3000K warm white is the ideal choice for atmospheric and relaxing outdoor lighting. This warm light approximates the colour temperature of traditional incandescent lamps and gives an inviting, cosy appearance to your garden, driveway and terrace — without the cold, sharp tone of daylight LED.
Direct Mains Connection — No Transformer Required
A major practical advantage of this ground spotlight is direct connection to AC100–240V mains voltage (220–240V in Europe). No separate transformer or driver is needed — simply connect to the existing garden circuit or outdoor socket. This makes installation simpler, cheaper and more reliable.
IP67 — Fully Weatherproof
With an IP67 protection rating, this ground spotlight is fully resistant to rain, dust, splashing water and temporary submersion. Suitable for permanent outdoor use in all weather conditions — from heavy rain to frost. The combination of a SS304 stainless steel cover ring and aluminium housing not only provides a luxurious appearance but also optimal heat dissipation and a long lifespan.
Easy Installation
The spot has a cutout size of 90 × 142 mm and comes with a 30 cm rubber waterproof cable (2 × 0.75 mm²). The waterproof cable is specially designed for in-ground use and provides extra protection against moisture and water. The overall product size is 100 × 145 mm.
Durable Materials
The XPRO Garden Lights ground spotlight is made from professional outdoor materials:
• Cover ring: SS304 stainless steel — corrosion-resistant and wear-resistant for intensive outdoor use
• Lamp body: aluminium — lightweight, strong and excellent heat dissipation for long LED lifespan
• Cable: 30 cm rubber waterproof cable — specially designed for in-ground and wet environments
Applications
The XPRO recessed ground spotlight Ø100 mm is ideal for the following outdoor applications:
• Driveway lighting — safe and atmospheric illumination of driveways and entrances
• Garden and footpaths
• Terraces and outdoor living areas
• Facade and wall accent lighting
• Tree uplighting
• Architectural garden lighting and decorative spots
• Commercial outdoor projects — hotels, resorts and public spaces
Benefits and Features
✔ Direct mains connection (AC100–240V) — no transformer required
✔ Professional Cree COB LED chip for even, powerful lighting
✔ Warm white 3000K — atmospheric appearance
✔ CRI ≥80 for true-to-life colour rendering
✔ Choice of 24° or 36° beam angle
✔ IP67 — fully weatherproof for permanent outdoor use
✔ SS304 stainless steel cover ring + aluminium housing
✔ Product size: 100 × 145 mm | Cutout size: 90 × 142 mm
✔ 30 cm rubber waterproof cable (2 × 0.75 mm²)
✔ Suitable for private and professional use
✔ 3-year warranty
Technical Specifications
|
Product size |
100 × 145 mm |
|
Cutout size |
90 × 142 mm |
|
Power |
12W |
|
LED type |
Cree COB |
|
Light colour |
3000K warm white |
|
CRI |
≥80 |
|
Beam angle |
24° or 36° |
|
Voltage |
AC100–240V (suitable for 220–240V) |
|
IP rating |
IP67 |
|
Cover ring material |
SS304 stainless steel |
|
Housing material |
Aluminium |
|
Cable |
30 cm — 2 × 0.75 mm² rubber waterproof |
|
Warranty |
3 years |
Questions about this product or help choosing the right beam angle? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED outdoor, garden and pool lighting
Recessed Ground Spotlight Ø100 mm — 12W — 3000K Warm White — IP67
AC100–240V | Cree COB LED | 24° or 36° | SS304 + Aluminium
The XPRO Garden Lights recessed ground spotlight Ø100 mm is a professional and compact LED ground light for durable outdoor use on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit or outdoor socket. Equipped with a Cree COB LED chip and available with a beam angle of 24° or 36°, this compact spot is ideal for precisely lighting trees, facades, driveways, garden paths and terraces. The warm 3000K light creates an atmospheric and inviting ambiance in any outdoor space.
|
IP67 |
Cree COB |
3000K |
CRI ≥80 |
AC220V |
3 jaar |
Powerful Cree COB Lighting on Mains Voltage
The recessed ground spotlight features a Cree COB LED chip (Chip-on-Board) — one of the most reliable and efficient LED technologies on the market. COB technology combines multiple LED chips into one unit for even light output, less heat generation and a longer lifespan. With a CRI ≥80, colours in the garden and on the facade are rendered naturally — highly important for decorative outdoor lighting.
Choice of 24° or 36° Beam Angle
The spot is available with two beam angles, allowing you to match the light beam to the specific application:
|
Angle |
Ideal for |
|
24° |
Narrow, focused beam — for tree lighting, facades and architectural accents at a distance |
|
36° |
Slightly wider beam — for garden paths, terraces, low shrubs and general garden lighting |
Warm White 3000K — Atmospheric Outdoor Lighting
The light colour of 3000K warm white is the ideal choice for atmospheric and relaxing outdoor lighting. This warm light approximates the colour temperature of traditional incandescent lamps and gives an inviting, cosy appearance to your garden, driveway and terrace — without the cold, sharp tone of daylight LED.
Direct Mains Connection — No Transformer Required
A major practical advantage of this ground spotlight is direct connection to AC100–240V mains voltage (220–240V in Europe). No separate transformer or driver is needed — simply connect to the existing garden circuit or outdoor socket. This makes installation simpler, cheaper and more reliable.
IP67 — Fully Weatherproof
With an IP67 protection rating, this ground spotlight is fully resistant to rain, dust, splashing water and temporary submersion. Suitable for permanent outdoor use in all weather conditions — from heavy rain to frost. The combination of a SS304 stainless steel cover ring and aluminium housing not only provides a luxurious appearance but also optimal heat dissipation and a long lifespan.
Easy Installation
The spot has a cutout size of 90 × 142 mm and comes with a 30 cm rubber waterproof cable (2 × 0.75 mm²). The waterproof cable is specially designed for in-ground use and provides extra protection against moisture and water. The overall product size is 100 × 145 mm.
Durable Materials
The XPRO Garden Lights ground spotlight is made from professional outdoor materials:
• Cover ring: SS304 stainless steel — corrosion-resistant and wear-resistant for intensive outdoor use
• Lamp body: aluminium — lightweight, strong and excellent heat dissipation for long LED lifespan
• Cable: 30 cm rubber waterproof cable — specially designed for in-ground and wet environments
Applications
The XPRO recessed ground spotlight Ø100 mm is ideal for the following outdoor applications:
• Driveway lighting — safe and atmospheric illumination of driveways and entrances
• Garden and footpaths
• Terraces and outdoor living areas
• Facade and wall accent lighting
• Tree uplighting
• Architectural garden lighting and decorative spots
• Commercial outdoor projects — hotels, resorts and public spaces
Benefits and Features
✔ Direct mains connection (AC100–240V) — no transformer required
✔ Professional Cree COB LED chip for even, powerful lighting
✔ Warm white 3000K — atmospheric appearance
✔ CRI ≥80 for true-to-life colour rendering
✔ Choice of 24° or 36° beam angle
✔ IP67 — fully weatherproof for permanent outdoor use
✔ SS304 stainless steel cover ring + aluminium housing
✔ Product size: 100 × 145 mm | Cutout size: 90 × 142 mm
✔ 30 cm rubber waterproof cable (2 × 0.75 mm²)
✔ Suitable for private and professional use
✔ 3-year warranty
Technical Specifications
|
Product size |
100 × 145 mm |
|
Cutout size |
90 × 142 mm |
|
Power |
12W |
|
LED type |
Cree COB |
|
Light colour |
3000K warm white |
|
CRI |
≥80 |
|
Beam angle |
24° or 36° |
|
Voltage |
AC100–240V (suitable for 220–240V) |
|
IP rating |
IP67 |
|
Cover ring material |
SS304 stainless steel |
|
Housing material |
Aluminium |
|
Cable |
30 cm — 2 × 0.75 mm² rubber waterproof |
|
Warranty |
3 years |
Questions about this product or help choosing the right beam angle? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED outdoor, garden and pool lighting
The XPRO Garden Lights recessed ground spotlight Ø100 mm is a professional and compact LED ground light for durable outdoor use on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit or outdoor socket. Equipped with a Cree COB LED chip and available with a beam angle of 24° or 36°, this compact spot is ideal for precisely lighting trees, facades, driveways, garden paths and terraces. The warm 3000K light creates an atmospheric and inviting ambiance in any outdoor space.
The XPRO Garden Lights recessed ground spotlight Ø100 mm is a professional and compact LED ground light for durable outdoor use on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit or outdoor socket. Equipped with a Cree COB LED chip and available with a beam angle of 24° or 36°, this compact spot is ideal for precisely lighting trees, facades, driveways, garden paths and terraces. The warm 3000K light creates an atmospheric and inviting ambiance in any outdoor space.
The XPRO Garden Lights recessed ground spotlight Ø100 mm is a professional and compact LED ground light for durable outdoor use on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit or outdoor socket. Equipped with a Cree COB LED chip and available with a beam angle of 24° or 36°, this compact spot is ideal for precisely lighting trees, facades, driveways, garden paths and terraces. The warm 3000K light creates an atmospheric and inviting ambiance in any outdoor space.
Recessed Ground Spotlight Ø80 mm — 8W — 3000K Warm White — IP67
AC100–240V | Cree COB LED | 24° or 36° | SS304 + Aluminium
The XPRO Garden Lights recessed ground spotlight Ø80 mm is the most compact LED ground light in the XPRO Garden Lights range — designed for sleek, subtle outdoor lighting on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit. With its small footprint of just 80 × 123 mm, this spot fits effortlessly into narrow paths, terrace edges and compact outdoor spaces. Equipped with a Cree COB LED chip (8W, 3000K) and available with a beam angle of 24° or 36°.
|
IP67 |
Cree COB |
3000K |
CRI ≥80 |
AC220V |
3 jaar |
Cree COB LED — Powerful Light in Compact Format
Despite its small size, the Ø80 mm ground spotlight delivers powerful light output thanks to its built-in Cree COB LED chip (Chip-on-Board). COB technology combines multiple LED chips into one unit for even light output, minimal heat generation and a long lifespan. With a CRI ≥80, colours in the garden and on the facade are rendered naturally — essential for atmospheric, decorative outdoor lighting.
Choice of 24° or 36° Beam Angle
The spot is available with two beam angles for optimal lighting in every application:
|
Angle |
Ideal for |
|
24° |
Narrow, focused beam — for tree lighting, facades and architectural accents at a distance |
|
36° |
Slightly wider beam — for garden paths, terrace edges, low planting and subtle mood lighting |
Warm White 3000K — Subtle Atmospheric Lighting
The light colour of 3000K warm white gives a soft, warm and inviting appearance to your outdoor space. Ideal for applications where atmosphere and subtlety are key — such as softly lighting garden paths, terrace edges or small plants and shrubs.
Direct Mains Connection — No Transformer Required
The Ø80 mm ground spotlight operates directly on AC100–240V mains voltage (220–240V in Europe). No separate transformer or driver needed — simply connect to the existing garden circuit or outdoor socket. This makes installation simpler, cheaper and more reliable, even for smaller garden projects.
IP67 — Fully Weatherproof
With an IP67 protection rating, this compact ground spotlight is fully resistant to rain, dust, splashing water and temporary submersion. Suitable for permanent outdoor use in all weather conditions. The combination of a SS304 stainless steel cover ring and aluminium housing provides a stylish appearance and optimal heat dissipation, despite the compact format.
Easy Installation — Compact and Versatile
The spot has a small cutout size of just 74 × 120 mm and comes with a 30 cm rubber waterproof cable (2 × 0.75 mm²). The small cutout makes this spot ideal for narrow paths, terrace edges and locations where larger ground spotlights do not fit. The overall product size is 80 × 123 mm.
Durable Materials
The XPRO Garden Lights ground spotlight Ø80 mm is made from professional outdoor materials:
• Cover ring: SS304 stainless steel — corrosion-resistant and wear-resistant for intensive outdoor use
• Lamp body: aluminium — lightweight, strong and excellent heat dissipation for long LED lifespan
• Cable: 30 cm rubber waterproof cable — specially designed for in-ground and wet environments
Applications
The XPRO recessed ground spotlight Ø80 mm is ideal for compact and subtle outdoor lighting:
• Garden paths and narrow footpaths
• Terrace edges and borders
• Driveway lighting in narrow locations
• Facade and wall accent lighting
• Tree uplighting
• Subtle architectural garden lighting
• Balconies, roof terraces and small outdoor spaces
Benefits and Features
✔ The most compact XPRO ground spotlight — just 80 × 123 mm
✔ Direct mains connection (AC100–240V) — no transformer required
✔ Professional Cree COB LED chip — 8W
✔ Warm white 3000K — subtle atmospheric lighting
✔ CRI ≥80 for true-to-life colour rendering
✔ Choice of 24° or 36° beam angle
✔ IP67 — fully weatherproof
✔ SS304 stainless steel cover ring + aluminium housing
✔ Small cutout size: 74 × 120 mm
✔ 30 cm rubber waterproof cable (2 × 0.75 mm²)
✔ Suitable for private and professional use
✔ 3-year warranty
Technical Specifications
|
Product size |
80 × 123 mm |
|
Cutout size |
74 × 120 mm |
|
Power |
8W |
|
LED type |
Cree COB |
|
Light colour |
3000K warm white |
|
CRI |
≥80 |
|
Beam angle |
24° or 36° |
|
Voltage |
AC100–240V (suitable for 220–240V) |
|
IP rating |
IP67 |
|
Cover ring material |
SS304 stainless steel |
|
Housing material |
Aluminium |
|
Cable |
30 cm — 2 × 0.75 mm² rubber waterproof |
|
Warranty |
3 years |
Questions about this product or help choosing the right beam angle? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED outdoor, garden and pool lighting
Recessed Ground Spotlight Ø80 mm — 8W — 3000K Warm White — IP67
AC100–240V | Cree COB LED | 24° or 36° | SS304 + Aluminium
The XPRO Garden Lights recessed ground spotlight Ø80 mm is the most compact LED ground light in the XPRO Garden Lights range — designed for sleek, subtle outdoor lighting on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit. With its small footprint of just 80 × 123 mm, this spot fits effortlessly into narrow paths, terrace edges and compact outdoor spaces. Equipped with a Cree COB LED chip (8W, 3000K) and available with a beam angle of 24° or 36°.
|
IP67 |
Cree COB |
3000K |
CRI ≥80 |
AC220V |
3 jaar |
Cree COB LED — Powerful Light in Compact Format
Despite its small size, the Ø80 mm ground spotlight delivers powerful light output thanks to its built-in Cree COB LED chip (Chip-on-Board). COB technology combines multiple LED chips into one unit for even light output, minimal heat generation and a long lifespan. With a CRI ≥80, colours in the garden and on the facade are rendered naturally — essential for atmospheric, decorative outdoor lighting.
Choice of 24° or 36° Beam Angle
The spot is available with two beam angles for optimal lighting in every application:
|
Angle |
Ideal for |
|
24° |
Narrow, focused beam — for tree lighting, facades and architectural accents at a distance |
|
36° |
Slightly wider beam — for garden paths, terrace edges, low planting and subtle mood lighting |
Warm White 3000K — Subtle Atmospheric Lighting
The light colour of 3000K warm white gives a soft, warm and inviting appearance to your outdoor space. Ideal for applications where atmosphere and subtlety are key — such as softly lighting garden paths, terrace edges or small plants and shrubs.
Direct Mains Connection — No Transformer Required
The Ø80 mm ground spotlight operates directly on AC100–240V mains voltage (220–240V in Europe). No separate transformer or driver needed — simply connect to the existing garden circuit or outdoor socket. This makes installation simpler, cheaper and more reliable, even for smaller garden projects.
IP67 — Fully Weatherproof
With an IP67 protection rating, this compact ground spotlight is fully resistant to rain, dust, splashing water and temporary submersion. Suitable for permanent outdoor use in all weather conditions. The combination of a SS304 stainless steel cover ring and aluminium housing provides a stylish appearance and optimal heat dissipation, despite the compact format.
Easy Installation — Compact and Versatile
The spot has a small cutout size of just 74 × 120 mm and comes with a 30 cm rubber waterproof cable (2 × 0.75 mm²). The small cutout makes this spot ideal for narrow paths, terrace edges and locations where larger ground spotlights do not fit. The overall product size is 80 × 123 mm.
Durable Materials
The XPRO Garden Lights ground spotlight Ø80 mm is made from professional outdoor materials:
• Cover ring: SS304 stainless steel — corrosion-resistant and wear-resistant for intensive outdoor use
• Lamp body: aluminium — lightweight, strong and excellent heat dissipation for long LED lifespan
• Cable: 30 cm rubber waterproof cable — specially designed for in-ground and wet environments
Applications
The XPRO recessed ground spotlight Ø80 mm is ideal for compact and subtle outdoor lighting:
• Garden paths and narrow footpaths
• Terrace edges and borders
• Driveway lighting in narrow locations
• Facade and wall accent lighting
• Tree uplighting
• Subtle architectural garden lighting
• Balconies, roof terraces and small outdoor spaces
Benefits and Features
✔ The most compact XPRO ground spotlight — just 80 × 123 mm
✔ Direct mains connection (AC100–240V) — no transformer required
✔ Professional Cree COB LED chip — 8W
✔ Warm white 3000K — subtle atmospheric lighting
✔ CRI ≥80 for true-to-life colour rendering
✔ Choice of 24° or 36° beam angle
✔ IP67 — fully weatherproof
✔ SS304 stainless steel cover ring + aluminium housing
✔ Small cutout size: 74 × 120 mm
✔ 30 cm rubber waterproof cable (2 × 0.75 mm²)
✔ Suitable for private and professional use
✔ 3-year warranty
Technical Specifications
|
Product size |
80 × 123 mm |
|
Cutout size |
74 × 120 mm |
|
Power |
8W |
|
LED type |
Cree COB |
|
Light colour |
3000K warm white |
|
CRI |
≥80 |
|
Beam angle |
24° or 36° |
|
Voltage |
AC100–240V (suitable for 220–240V) |
|
IP rating |
IP67 |
|
Cover ring material |
SS304 stainless steel |
|
Housing material |
Aluminium |
|
Cable |
30 cm — 2 × 0.75 mm² rubber waterproof |
|
Warranty |
3 years |
Questions about this product or help choosing the right beam angle? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED outdoor, garden and pool lighting
The XPRO Garden Lights recessed ground spotlight Ø80 mm is the most compact LED ground light in the XPRO Garden Lights range — designed for sleek, subtle outdoor lighting on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit. With its small footprint of just 80 × 123 mm, this spot fits effortlessly into narrow paths, terrace edges and compact outdoor spaces. Equipped with a Cree COB LED chip (8W, 3000K) and available with a beam angle of 24° or 36°.
The XPRO Garden Lights recessed ground spotlight Ø80 mm is the most compact LED ground light in the XPRO Garden Lights range — designed for sleek, subtle outdoor lighting on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit. With its small footprint of just 80 × 123 mm, this spot fits effortlessly into narrow paths, terrace edges and compact outdoor spaces. Equipped with a Cree COB LED chip (8W, 3000K) and available with a beam angle of 24° or 36°.
The XPRO Garden Lights recessed ground spotlight Ø80 mm is the most compact LED ground light in the XPRO Garden Lights range — designed for sleek, subtle outdoor lighting on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit. With its small footprint of just 80 × 123 mm, this spot fits effortlessly into narrow paths, terrace edges and compact outdoor spaces. Equipped with a Cree COB LED chip (8W, 3000K) and available with a beam angle of 24° or 36°.
Recessed Ground Spotlight Ø70 mm — 6W — 3000K Warm White — IP67
AC100–240V | Cree COB LED | 24° or 36° | SS304 + Aluminium
The XPRO Garden Lights recessed ground spotlight Ø70 mm is the smallest and most energy-efficient LED ground light in the XPRO Garden Lights range — designed for stylish, subtle outdoor lighting on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit. With an outer size of just 70 × 100 mm, this mini ground spotlight is the ideal choice for narrow paths, terrace edges, borders and anywhere discreet yet effective lighting is needed. Equipped with a Cree COB LED chip (6W, 3000K) and available with a beam angle of 24° or 36°.
|
IP67 |
Cree COB |
3000K |
CRI ≥80 |
AC220V |
3 jaar |
Cree COB LED — Effective Light in Miniature Format
Despite its minimal dimensions, the Ø70 mm ground spotlight delivers targeted and effective light output thanks to its built-in Cree COB LED chip (Chip-on-Board). COB technology combines multiple LED chips into one unit for even light output, minimal heat generation and a long lifespan. With a CRI ≥80, colours in the garden and on the facade are reproduced accurately and naturally — essential for quality decorative outdoor lighting.
Choice of 24° or 36° Beam Angle
The spot is available with two beam angles for precise lighting in every application:
|
Angle |
Ideal for |
|
24° |
Narrow, focused beam — for accent lighting of trees, facade elements and architectural details |
|
36° |
Slightly wider beam — for borders, terrace edges, low planting and atmospheric path lighting |
Warm White 3000K — Soft Atmospheric Lighting
The light colour 3000K warm white gives a soft, warm glow to your outdoor space. Perfect for atmospheric lighting where subtlety and warmth are key — ideal for softly illuminating garden paths, borders, plants and terrace edges without intrusive bright light points.
Direct Mains Connection — No Transformer Required
The Ø70 mm ground spotlight operates directly on AC100–240V mains voltage (220–240V in Europe). No separate transformer or driver needed — simply connect to the existing garden circuit or outdoor socket. Ideal for smaller garden projects, renovations and locations where no lighting previously existed.
IP67 — Fully Weatherproof
With an IP67 protection rating, this miniature ground spotlight is fully resistant to rain, dust, splashing water and temporary submersion. Suitable for year-round permanent outdoor use. The robust SS304 stainless steel cover ring and aluminium housing provide a stylish appearance and optimal heat dissipation — despite the extremely compact format.
Easy Installation — Mini Format, Maximum Versatility
The spot has an extremely small cutout size of just 62 × 100 mm and comes with a 30 cm rubber waterproof cable (2 × 0.75 mm²). The minimal cutout makes this spot suitable for any location — even where other ground spotlights are too large. Overall product size: 70 × 100 mm.
Durable Materials
The XPRO Garden Lights ground spotlight Ø70 mm is made from quality outdoor materials:
• Cover ring: SS304 stainless steel — corrosion-resistant and wear-resistant for long-term outdoor use
• Lamp body: aluminium — lightweight, strong and excellent heat dissipation for long LED lifespan
• Cable: 30 cm rubber waterproof cable — specially designed for in-ground and wet environments
Applications
The XPRO recessed ground spotlight Ø70 mm is the perfect choice for subtle and discreet outdoor lighting:
• Narrow garden paths and footpaths
• Borders and plant edges
• Terrace edges and bed dividers
• Facade elements and architectural details
• Discreet tree uplighting
• Subtle accent lighting in gardens
• Balconies, roof terraces and small outdoor spaces
Benefits and Features
✔ The smallest XPRO ground spotlight — just 70 × 100 mm
✔ Direct mains connection (AC100–240V) — no transformer required
✔ Professional Cree COB LED chip — 6W, energy-efficient
✔ Warm white 3000K — soft atmospheric lighting
✔ CRI ≥80 for true-to-life colour rendering
✔ Choice of 24° or 36° beam angle
✔ IP67 — fully weatherproof
✔ SS304 stainless steel cover ring + aluminium housing
✔ Smallest cutout in the range: 62 × 100 mm
✔ 30 cm rubber waterproof cable (2 × 0.75 mm²)
✔ Suitable for private and professional use
✔ 3-year warranty
Technical Specifications
|
Product size |
70 × 100 mm |
|
Cutout size |
62 × 100 mm |
|
Power |
6W |
|
LED type |
Cree COB |
|
Light colour |
3000K warm white |
|
CRI |
≥80 |
|
Beam angle |
24° or 36° |
|
Voltage |
AC100–240V (suitable for 220–240V) |
|
IP rating |
IP67 |
|
Cover ring material |
SS304 stainless steel |
|
Housing material |
Aluminium |
|
Cable |
30 cm — 2 × 0.75 mm² rubber waterproof |
|
Warranty |
3 years |
Questions about this product or help choosing the right beam angle? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED outdoor, garden and pool lighting
Recessed Ground Spotlight Ø70 mm — 6W — 3000K Warm White — IP67
AC100–240V | Cree COB LED | 24° or 36° | SS304 + Aluminium
The XPRO Garden Lights recessed ground spotlight Ø70 mm is the smallest and most energy-efficient LED ground light in the XPRO Garden Lights range — designed for stylish, subtle outdoor lighting on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit. With an outer size of just 70 × 100 mm, this mini ground spotlight is the ideal choice for narrow paths, terrace edges, borders and anywhere discreet yet effective lighting is needed. Equipped with a Cree COB LED chip (6W, 3000K) and available with a beam angle of 24° or 36°.
|
IP67 |
Cree COB |
3000K |
CRI ≥80 |
AC220V |
3 jaar |
Cree COB LED — Effective Light in Miniature Format
Despite its minimal dimensions, the Ø70 mm ground spotlight delivers targeted and effective light output thanks to its built-in Cree COB LED chip (Chip-on-Board). COB technology combines multiple LED chips into one unit for even light output, minimal heat generation and a long lifespan. With a CRI ≥80, colours in the garden and on the facade are reproduced accurately and naturally — essential for quality decorative outdoor lighting.
Choice of 24° or 36° Beam Angle
The spot is available with two beam angles for precise lighting in every application:
|
Angle |
Ideal for |
|
24° |
Narrow, focused beam — for accent lighting of trees, facade elements and architectural details |
|
36° |
Slightly wider beam — for borders, terrace edges, low planting and atmospheric path lighting |
Warm White 3000K — Soft Atmospheric Lighting
The light colour 3000K warm white gives a soft, warm glow to your outdoor space. Perfect for atmospheric lighting where subtlety and warmth are key — ideal for softly illuminating garden paths, borders, plants and terrace edges without intrusive bright light points.
Direct Mains Connection — No Transformer Required
The Ø70 mm ground spotlight operates directly on AC100–240V mains voltage (220–240V in Europe). No separate transformer or driver needed — simply connect to the existing garden circuit or outdoor socket. Ideal for smaller garden projects, renovations and locations where no lighting previously existed.
IP67 — Fully Weatherproof
With an IP67 protection rating, this miniature ground spotlight is fully resistant to rain, dust, splashing water and temporary submersion. Suitable for year-round permanent outdoor use. The robust SS304 stainless steel cover ring and aluminium housing provide a stylish appearance and optimal heat dissipation — despite the extremely compact format.
Easy Installation — Mini Format, Maximum Versatility
The spot has an extremely small cutout size of just 62 × 100 mm and comes with a 30 cm rubber waterproof cable (2 × 0.75 mm²). The minimal cutout makes this spot suitable for any location — even where other ground spotlights are too large. Overall product size: 70 × 100 mm.
Durable Materials
The XPRO Garden Lights ground spotlight Ø70 mm is made from quality outdoor materials:
• Cover ring: SS304 stainless steel — corrosion-resistant and wear-resistant for long-term outdoor use
• Lamp body: aluminium — lightweight, strong and excellent heat dissipation for long LED lifespan
• Cable: 30 cm rubber waterproof cable — specially designed for in-ground and wet environments
Applications
The XPRO recessed ground spotlight Ø70 mm is the perfect choice for subtle and discreet outdoor lighting:
• Narrow garden paths and footpaths
• Borders and plant edges
• Terrace edges and bed dividers
• Facade elements and architectural details
• Discreet tree uplighting
• Subtle accent lighting in gardens
• Balconies, roof terraces and small outdoor spaces
Benefits and Features
✔ The smallest XPRO ground spotlight — just 70 × 100 mm
✔ Direct mains connection (AC100–240V) — no transformer required
✔ Professional Cree COB LED chip — 6W, energy-efficient
✔ Warm white 3000K — soft atmospheric lighting
✔ CRI ≥80 for true-to-life colour rendering
✔ Choice of 24° or 36° beam angle
✔ IP67 — fully weatherproof
✔ SS304 stainless steel cover ring + aluminium housing
✔ Smallest cutout in the range: 62 × 100 mm
✔ 30 cm rubber waterproof cable (2 × 0.75 mm²)
✔ Suitable for private and professional use
✔ 3-year warranty
Technical Specifications
|
Product size |
70 × 100 mm |
|
Cutout size |
62 × 100 mm |
|
Power |
6W |
|
LED type |
Cree COB |
|
Light colour |
3000K warm white |
|
CRI |
≥80 |
|
Beam angle |
24° or 36° |
|
Voltage |
AC100–240V (suitable for 220–240V) |
|
IP rating |
IP67 |
|
Cover ring material |
SS304 stainless steel |
|
Housing material |
Aluminium |
|
Cable |
30 cm — 2 × 0.75 mm² rubber waterproof |
|
Warranty |
3 years |
Questions about this product or help choosing the right beam angle? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED outdoor, garden and pool lighting
The XPRO Garden Lights recessed ground spotlight Ø70 mm is the smallest and most energy-efficient LED ground light in the XPRO Garden Lights range — designed for stylish, subtle outdoor lighting on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit. With an outer size of just 70 × 100 mm, this mini ground spotlight is the ideal choice for narrow paths, terrace edges, borders and anywhere discreet yet effective lighting is needed. Equipped with a Cree COB LED chip (6W, 3000K) and available with a beam angle of 24° or 36°.
The XPRO Garden Lights recessed ground spotlight Ø70 mm is the smallest and most energy-efficient LED ground light in the XPRO Garden Lights range — designed for stylish, subtle outdoor lighting on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit. With an outer size of just 70 × 100 mm, this mini ground spotlight is the ideal choice for narrow paths, terrace edges, borders and anywhere discreet yet effective lighting is needed. Equipped with a Cree COB LED chip (6W, 3000K) and available with a beam angle of 24° or 36°.
The XPRO Garden Lights recessed ground spotlight Ø70 mm is the smallest and most energy-efficient LED ground light in the XPRO Garden Lights range — designed for stylish, subtle outdoor lighting on mains voltage (AC100–240V / 220–240V). No transformer required — connects directly to an existing garden circuit. With an outer size of just 70 × 100 mm, this mini ground spotlight is the ideal choice for narrow paths, terrace edges, borders and anywhere discreet yet effective lighting is needed. Equipped with a Cree COB LED chip (6W, 3000K) and available with a beam angle of 24° or 36°.
XPRO Garden Spike LED Spot 20W — IP65 — AC 85–265V
Bridgelux LED | 3000K / 6000K | 15° – 24° – 36° | Aluminium Housing | Spike Mount
The XPRO Garden Spike LED Spot 20W is a professional and powerful garden spotlight with ground spike, specially designed for durable outdoor lighting of gardens, lawns, trees, facades, parks and architectural elements. Thanks to the integrated Bridgelux LED chip and a high-quality Done Driver, this spot delivers stable, powerful light output on AC 85–265V — no external transformer required. Simply spike it in, aim it and it's ready.
|
IP65 |
Bridgelux |
20W |
CRI ≥80 |
AC85–265V |
Spike |
Bridgelux LED — Professional Quality You Can See
The XPRO Spike Spot is equipped with a Bridgelux LED chip — a premium American LED manufacturer renowned for high light output, stable colour temperature and exceptional reliability. Bridgelux LEDs are used worldwide in professional lighting for projects where quality and longevity are paramount. With a CRI ≥80, the colours of trees, facades and garden plants are reproduced accurately and naturally — even at night.
Choice of 15°, 24° or 36° Beam Angle
The XPRO Garden Spike Spot is available in three beam angles for perfect accent lighting in every application:
|
Angle |
Ideal for |
|
15° |
Very narrow, powerful beam — for tall trees, slender facade elements and vertical accent lighting at long range |
|
24° |
Focused beam — for medium-sized trees, shrubs, sculptures and architectural details |
|
36° |
Wider spread — for low planting, wide facades, ground cover and general garden or lawn lighting |
Warm White or Cool White — Your Choice
The spot is available in two colour temperatures for every atmosphere and application:
|
Version |
Colour temperature |
Atmosphere |
|
Warm white |
3000K |
Warm, atmospheric and inviting — ideal for residential gardens |
|
Cool white |
6000K |
Bright, crisp and powerful — ideal for commercial and public projects |
Operates Directly on AC 85–265V — No Transformer Required
A major practical advantage of the XPRO Spike Spot is direct connection to AC 85–265V (50/60 Hz) — the wide input voltage range makes this lamp suitable for use across Europe, America and Asia without any modification. No external transformer or driver needed. Simply connect to the existing garden circuit or outdoor socket.
High-Quality Done Driver
The spot is equipped with a Done Driver — a high-quality built-in power supply that absorbs voltage instability and current fluctuations. This protects the LED chip, ensures consistent light output and significantly extends the lifespan. The combination of Bridgelux LED and Done Driver makes this spot exceptionally reliable for long-term outdoor installations.
IP65 — Fully Protected Against Rain and Dust
With an IP65 protection rating, the XPRO Spike Spot is fully protected against dust and water jets from all directions. Suitable for permanent outdoor use in all weather conditions — from heavy rain to frost. The robust die-cast aluminium housing also provides excellent heat dissipation, protecting the LED chip and driver and maximising lifespan.
Spike Mount — Easy and Flexible Placement
The built-in ground spike makes installation effortless: push the spike into the ground, aim the spot at the desired object and it's ready. No tools, no drilling, no complex fixing. The spot can easily be moved or re-aimed — ideal for seasonal lighting, temporary event lighting or gradually refining your garden lighting.
Professional Material Quality
The XPRO Garden Spike Spot is built for long-term professional outdoor use:
• Housing: die-cast aluminium — robust, corrosion-resistant and excellent heat dissipation
• LED: 1 × Bridgelux chip — premium American LED for high light output and long lifespan
• Driver: Done Driver — high-quality built-in power supply for stable performance and additional protection
Applications
The XPRO Garden Spike LED Spot 20W is ideal for a wide range of outdoor applications:
• Tree lighting — uplighting ornamental garden trees
• Shrub lighting and accent lighting of low planting
• Facade lighting and architectural accent lighting
• Garden and lawn lighting
• Park lighting and public spaces
• Driveway and entrance lighting
• Event and temporary garden lighting
• Professional landscaping and project lighting
Benefits and Features
✔ Powerful 20W Bridgelux LED — premium chip quality
✔ Direct connection to AC 85–265V — no transformer, suitable worldwide
✔ Choice of 3000K (warm white) or 6000K (cool white)
✔ 3 beam angles: 15° / 24° / 36°
✔ CRI ≥80 for true-to-life colour rendering
✔ IP65 — fully protected against rain and dust
✔ Robust die-cast aluminium housing
✔ Built-in high-quality Done Driver
✔ Spike mount — easy to place and reposition
✔ Dimensions: 90 × 165 × 440 mm
✔ Suitable for private and professional use
Technical Specifications
|
Dimensions |
90 × 165 × 440 mm |
|
Mount type |
Spike (ground spike) |
|
Power |
20W |
|
LED type |
1 × Bridgelux chip |
|
Input voltage |
AC 85–265V / 50–60Hz |
|
Colour temperature |
3000K warm white / 6000K cool white |
|
CRI |
≥80 |
|
Beam angle |
15° / 24° / 36° |
|
Driver |
Done Driver (built-in high-quality power supply) |
|
IP rating |
IP65 |
|
Material |
Die-cast aluminium |
|
Application |
Garden, lawn, park, facade, tree lighting, driveway |
Questions about this product or need professional advice? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED outdoor, garden and pool lighting
XPRO Garden Spike LED Spot 20W — IP65 — AC 85–265V
Bridgelux LED | 3000K / 6000K | 15° – 24° – 36° | Aluminium Housing | Spike Mount
The XPRO Garden Spike LED Spot 20W is a professional and powerful garden spotlight with ground spike, specially designed for durable outdoor lighting of gardens, lawns, trees, facades, parks and architectural elements. Thanks to the integrated Bridgelux LED chip and a high-quality Done Driver, this spot delivers stable, powerful light output on AC 85–265V — no external transformer required. Simply spike it in, aim it and it's ready.
|
IP65 |
Bridgelux |
20W |
CRI ≥80 |
AC85–265V |
Spike |
Bridgelux LED — Professional Quality You Can See
The XPRO Spike Spot is equipped with a Bridgelux LED chip — a premium American LED manufacturer renowned for high light output, stable colour temperature and exceptional reliability. Bridgelux LEDs are used worldwide in professional lighting for projects where quality and longevity are paramount. With a CRI ≥80, the colours of trees, facades and garden plants are reproduced accurately and naturally — even at night.
Choice of 15°, 24° or 36° Beam Angle
The XPRO Garden Spike Spot is available in three beam angles for perfect accent lighting in every application:
|
Angle |
Ideal for |
|
15° |
Very narrow, powerful beam — for tall trees, slender facade elements and vertical accent lighting at long range |
|
24° |
Focused beam — for medium-sized trees, shrubs, sculptures and architectural details |
|
36° |
Wider spread — for low planting, wide facades, ground cover and general garden or lawn lighting |
Warm White or Cool White — Your Choice
The spot is available in two colour temperatures for every atmosphere and application:
|
Version |
Colour temperature |
Atmosphere |
|
Warm white |
3000K |
Warm, atmospheric and inviting — ideal for residential gardens |
|
Cool white |
6000K |
Bright, crisp and powerful — ideal for commercial and public projects |
Operates Directly on AC 85–265V — No Transformer Required
A major practical advantage of the XPRO Spike Spot is direct connection to AC 85–265V (50/60 Hz) — the wide input voltage range makes this lamp suitable for use across Europe, America and Asia without any modification. No external transformer or driver needed. Simply connect to the existing garden circuit or outdoor socket.
High-Quality Done Driver
The spot is equipped with a Done Driver — a high-quality built-in power supply that absorbs voltage instability and current fluctuations. This protects the LED chip, ensures consistent light output and significantly extends the lifespan. The combination of Bridgelux LED and Done Driver makes this spot exceptionally reliable for long-term outdoor installations.
IP65 — Fully Protected Against Rain and Dust
With an IP65 protection rating, the XPRO Spike Spot is fully protected against dust and water jets from all directions. Suitable for permanent outdoor use in all weather conditions — from heavy rain to frost. The robust die-cast aluminium housing also provides excellent heat dissipation, protecting the LED chip and driver and maximising lifespan.
Spike Mount — Easy and Flexible Placement
The built-in ground spike makes installation effortless: push the spike into the ground, aim the spot at the desired object and it's ready. No tools, no drilling, no complex fixing. The spot can easily be moved or re-aimed — ideal for seasonal lighting, temporary event lighting or gradually refining your garden lighting.
Professional Material Quality
The XPRO Garden Spike Spot is built for long-term professional outdoor use:
• Housing: die-cast aluminium — robust, corrosion-resistant and excellent heat dissipation
• LED: 1 × Bridgelux chip — premium American LED for high light output and long lifespan
• Driver: Done Driver — high-quality built-in power supply for stable performance and additional protection
Applications
The XPRO Garden Spike LED Spot 20W is ideal for a wide range of outdoor applications:
• Tree lighting — uplighting ornamental garden trees
• Shrub lighting and accent lighting of low planting
• Facade lighting and architectural accent lighting
• Garden and lawn lighting
• Park lighting and public spaces
• Driveway and entrance lighting
• Event and temporary garden lighting
• Professional landscaping and project lighting
Benefits and Features
✔ Powerful 20W Bridgelux LED — premium chip quality
✔ Direct connection to AC 85–265V — no transformer, suitable worldwide
✔ Choice of 3000K (warm white) or 6000K (cool white)
✔ 3 beam angles: 15° / 24° / 36°
✔ CRI ≥80 for true-to-life colour rendering
✔ IP65 — fully protected against rain and dust
✔ Robust die-cast aluminium housing
✔ Built-in high-quality Done Driver
✔ Spike mount — easy to place and reposition
✔ Dimensions: 90 × 165 × 440 mm
✔ Suitable for private and professional use
Technical Specifications
|
Dimensions |
90 × 165 × 440 mm |
|
Mount type |
Spike (ground spike) |
|
Power |
20W |
|
LED type |
1 × Bridgelux chip |
|
Input voltage |
AC 85–265V / 50–60Hz |
|
Colour temperature |
3000K warm white / 6000K cool white |
|
CRI |
≥80 |
|
Beam angle |
15° / 24° / 36° |
|
Driver |
Done Driver (built-in high-quality power supply) |
|
IP rating |
IP65 |
|
Material |
Die-cast aluminium |
|
Application |
Garden, lawn, park, facade, tree lighting, driveway |
Questions about this product or need professional advice? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED outdoor, garden and pool lighting
The XPRO Garden Spike LED Spot 20W is a professional and powerful garden spotlight with ground spike, specially designed for durable outdoor lighting of gardens, lawns, trees, facades, parks and architectural elements. Thanks to the integrated Bridgelux LED chip and a high-quality Done Driver, this spot delivers stable, powerful light output on AC 85–265V — no external transformer required. Simply spike it in, aim it and it's ready.
The XPRO Garden Spike LED Spot 20W is a professional and powerful garden spotlight with ground spike, specially designed for durable outdoor lighting of gardens, lawns, trees, facades, parks and architectural elements. Thanks to the integrated Bridgelux LED chip and a high-quality Done Driver, this spot delivers stable, powerful light output on AC 85–265V — no external transformer required. Simply spike it in, aim it and it's ready.
The XPRO Garden Spike LED Spot 20W is a professional and powerful garden spotlight with ground spike, specially designed for durable outdoor lighting of gardens, lawns, trees, facades, parks and architectural elements. Thanks to the integrated Bridgelux LED chip and a high-quality Done Driver, this spot delivers stable, powerful light output on AC 85–265V — no external transformer required. Simply spike it in, aim it and it's ready.
XPW-1071 PRO LINE Smart Controller RGB / RGBW (2-Wire)
Built-In Power Supply | WiFi & Bluetooth | App Control | 600W | IP65
The XPW-1071 PRO LINE Smart Controller is a powerful, stylish and complete all-in-one controller for RGB and RGBW pool lighting via the 2-wire system. Thanks to its built-in power supply, this controller operates directly on AC 110–230V — no external transformer or separate power supply required. Via WiFi, Bluetooth and mobile app, you have full control over your pool's lighting, from relaxing warm white to dynamic colour shows.
|
IP65 |
WiFi |
Bluetooth |
600W |
App |
PRO LINE |
Smart Control — Full Control via App and Remote
The XPW-1071 offers extensive smart functionality for modern pool installations:
|
Feature |
Details |
|
Smartphone app |
iOS and Android — full colour and programme control |
|
WiFi connection |
2.4GHz — remote control via home network |
|
Bluetooth |
Direct connection without router — always accessible near the pool |
|
RF remote control |
Included — direct control without smartphone |
|
7 fixed colours |
Directly selectable via app or remote |
|
Dynamic programmes |
Multiple colour and light effects adjustable |
|
Brightness control |
Dimmable via app or remote control |
|
Synchronisation |
Control and synchronise multiple lamps simultaneously |
Built-In Power Supply — All-in-One Solution
A key advantage of the XPW-1071 is the integrated power supply (AC 110–230V). No separate transformer or external driver is needed. The controller works as a complete standalone solution: connect to the mains, couple with the pool lights and you are ready. This saves installation time, reduces total costs and makes the installation cleaner.
Compatible with 2-Wire RGB / RGBW Lamps
The XPW-1071 is specifically designed for 2-wire RGB and RGBW pool lights and is fully compatible with the entire PRO LINE lamp range from XPRO POOL. Suitable for surface-mounted and recessed lights, for both new installations and renovation of existing pools. With a maximum power of 600W, the controller is suitable for larger pool installations with multiple lamps.
IP65 — Protected for Use Near the Pool
The XPW-1071 has an IP65 protection rating — fully protected against dust and water jets. This makes the controller suitable for mounting close to the pool, even in humid environments. The housing is made of high-quality PC with a toughened glass touch panel for a stylish and durable appearance.
Easy Wall Mounting
The XPW-1071 is mounted as a wall unit via the built-in wall mounting bracket. The compact and sleek housing fits seamlessly into any technical room or outdoor area near the pool. Configuration is simple via the free app or RF remote control.
PRO LINE Quality — Built for Professional Installations
The XPW-1071 belongs to the XPRO PRO LINE series — the top range from XPRO POOL designed for professional and demanding pool installations. PRO LINE guarantees professional finish, stable signal transmission, high load capacity and reliable performance — also in the long term and for larger projects.
Applications
The XPW-1071 PRO LINE Smart Controller is ideal for:
• Private and commercial swimming pools
• Spas and hot tubs
• Wellness and thermal projects
• Fountains with RGB or RGBW lighting
• Water features and water elements
• Renovation of existing pool installations
• Professional installations with multiple lamps
Benefits and Features
✔ All-in-one: built-in power supply — no external transformer required
✔ Direct connection to AC 110–230V
✔ Compatible with 2-wire RGB and RGBW pool lights
✔ Maximum power: 600W — for larger installations
✔ Control via WiFi, Bluetooth, app and RF remote
✔ 7 fixed colours + multiple dynamic programmes
✔ Dimmable brightness
✔ Synchronisation of multiple lamps
✔ IP65 — safe for use near the pool
✔ Toughened glass touch panel
✔ Sleek wall-mount housing in PC
✔ Wireless frequency: 2.4GHz
✔ Fully compatible with PRO LINE pool lights
Technical Specifications
|
Model |
XPW-1071 |
|
Series |
PRO LINE |
|
Input voltage |
AC 110–230V |
|
Output voltage |
AC 110–230V |
|
Maximum power |
600W |
|
System |
2-wire RGB / RGBW |
|
Wireless frequency |
2.4GHz |
|
Connection |
WiFi + Bluetooth |
|
Control |
Smartphone app (iOS & Android) + RF remote control |
|
IP rating |
IP65 |
|
Housing |
PC with toughened glass touch panel |
|
Mounting |
Wall mounting |
|
Applications |
Pool, spa, fountain, water feature, wellness |
Questions about the XPW-1071 or advice on the right controller for your pool installation? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED pool lighting, controllers and outdoor lighting
XPW-1071 PRO LINE Smart Controller RGB / RGBW (2-Wire)
Built-In Power Supply | WiFi & Bluetooth | App Control | 600W | IP65
The XPW-1071 PRO LINE Smart Controller is a powerful, stylish and complete all-in-one controller for RGB and RGBW pool lighting via the 2-wire system. Thanks to its built-in power supply, this controller operates directly on AC 110–230V — no external transformer or separate power supply required. Via WiFi, Bluetooth and mobile app, you have full control over your pool's lighting, from relaxing warm white to dynamic colour shows.
|
IP65 |
WiFi |
Bluetooth |
600W |
App |
PRO LINE |
Smart Control — Full Control via App and Remote
The XPW-1071 offers extensive smart functionality for modern pool installations:
|
Feature |
Details |
|
Smartphone app |
iOS and Android — full colour and programme control |
|
WiFi connection |
2.4GHz — remote control via home network |
|
Bluetooth |
Direct connection without router — always accessible near the pool |
|
RF remote control |
Included — direct control without smartphone |
|
7 fixed colours |
Directly selectable via app or remote |
|
Dynamic programmes |
Multiple colour and light effects adjustable |
|
Brightness control |
Dimmable via app or remote control |
|
Synchronisation |
Control and synchronise multiple lamps simultaneously |
Built-In Power Supply — All-in-One Solution
A key advantage of the XPW-1071 is the integrated power supply (AC 110–230V). No separate transformer or external driver is needed. The controller works as a complete standalone solution: connect to the mains, couple with the pool lights and you are ready. This saves installation time, reduces total costs and makes the installation cleaner.
Compatible with 2-Wire RGB / RGBW Lamps
The XPW-1071 is specifically designed for 2-wire RGB and RGBW pool lights and is fully compatible with the entire PRO LINE lamp range from XPRO POOL. Suitable for surface-mounted and recessed lights, for both new installations and renovation of existing pools. With a maximum power of 600W, the controller is suitable for larger pool installations with multiple lamps.
IP65 — Protected for Use Near the Pool
The XPW-1071 has an IP65 protection rating — fully protected against dust and water jets. This makes the controller suitable for mounting close to the pool, even in humid environments. The housing is made of high-quality PC with a toughened glass touch panel for a stylish and durable appearance.
Easy Wall Mounting
The XPW-1071 is mounted as a wall unit via the built-in wall mounting bracket. The compact and sleek housing fits seamlessly into any technical room or outdoor area near the pool. Configuration is simple via the free app or RF remote control.
PRO LINE Quality — Built for Professional Installations
The XPW-1071 belongs to the XPRO PRO LINE series — the top range from XPRO POOL designed for professional and demanding pool installations. PRO LINE guarantees professional finish, stable signal transmission, high load capacity and reliable performance — also in the long term and for larger projects.
Applications
The XPW-1071 PRO LINE Smart Controller is ideal for:
• Private and commercial swimming pools
• Spas and hot tubs
• Wellness and thermal projects
• Fountains with RGB or RGBW lighting
• Water features and water elements
• Renovation of existing pool installations
• Professional installations with multiple lamps
Benefits and Features
✔ All-in-one: built-in power supply — no external transformer required
✔ Direct connection to AC 110–230V
✔ Compatible with 2-wire RGB and RGBW pool lights
✔ Maximum power: 600W — for larger installations
✔ Control via WiFi, Bluetooth, app and RF remote
✔ 7 fixed colours + multiple dynamic programmes
✔ Dimmable brightness
✔ Synchronisation of multiple lamps
✔ IP65 — safe for use near the pool
✔ Toughened glass touch panel
✔ Sleek wall-mount housing in PC
✔ Wireless frequency: 2.4GHz
✔ Fully compatible with PRO LINE pool lights
Technical Specifications
|
Model |
XPW-1071 |
|
Series |
PRO LINE |
|
Input voltage |
AC 110–230V |
|
Output voltage |
AC 110–230V |
|
Maximum power |
600W |
|
System |
2-wire RGB / RGBW |
|
Wireless frequency |
2.4GHz |
|
Connection |
WiFi + Bluetooth |
|
Control |
Smartphone app (iOS & Android) + RF remote control |
|
IP rating |
IP65 |
|
Housing |
PC with toughened glass touch panel |
|
Mounting |
Wall mounting |
|
Applications |
Pool, spa, fountain, water feature, wellness |
Questions about the XPW-1071 or advice on the right controller for your pool installation? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED pool lighting, controllers and outdoor lighting
The XPW-1071 PRO LINE Smart Controller is a powerful, stylish and complete all-in-one controller for RGB and RGBW pool lighting via the 2-wire system. Thanks to its built-in power supply, this controller operates directly on AC 110–230V — no external transformer or separate power supply required. Via WiFi, Bluetooth and mobile app, you have full control over your pool's lighting, from relaxing warm white to dynamic colour shows.
The XPW-1071 PRO LINE Smart Controller is a powerful, stylish and complete all-in-one controller for RGB and RGBW pool lighting via the 2-wire system. Thanks to its built-in power supply, this controller operates directly on AC 110–230V — no external transformer or separate power supply required. Via WiFi, Bluetooth and mobile app, you have full control over your pool's lighting, from relaxing warm white to dynamic colour shows.
The XPW-1071 PRO LINE Smart Controller is a powerful, stylish and complete all-in-one controller for RGB and RGBW pool lighting via the 2-wire system. Thanks to its built-in power supply, this controller operates directly on AC 110–230V — no external transformer or separate power supply required. Via WiFi, Bluetooth and mobile app, you have full control over your pool's lighting, from relaxing warm white to dynamic colour shows.
XPW-1075 Smart Controller RGB / RGBW (4- and 5-Wire) — DC 12V/24V
Built-In Power Supply | WiFi & Bluetooth | App Control | 200W | IP65
The XPW-1075 Smart Controller is a powerful and professional all-in-one control unit for DC pool lighting — RGB (4-wire) and RGBW (5-wire). With its built-in power supply, the controller operates directly on AC 110–230V and delivers a stable 12V or 24V DC output — no separate transformer required. Compatible with virtually all DC pool lights, PAR56 lamps, recessed lights and LED strips. Ideal for new installations and smart upgrades of existing pool lighting.
|
IP65 |
WiFi |
Bluetooth |
200W |
12V/24V DC |
App |
Smart Control — Full Control via App and Remote
The XPW-1075 offers extensive smart functionality for maximum atmosphere control:
|
Feature |
Details |
|
Smartphone app |
iOS and Android — colour mixing via colour wheel, programmes and dimming |
|
WiFi connection |
2.4GHz — remote control via home network, also from a distance |
|
Bluetooth |
Direct connection without router — always accessible near the pool |
|
RF remote control |
Included — direct control without smartphone |
|
7 fixed colours |
Quickly selectable via app or remote |
|
Dynamic programmes |
Multiple colour and light programmes adjustable |
|
Per-channel dimming |
Brightness adjustable per R/G/B/W colour channel individually |
|
Speed control |
Transition speed of dynamic programmes adjustable |
|
Synchronisation |
Control and synchronise multiple lamps simultaneously |
Broadly Compatible — Suitable for Virtually All DC Pool Lights
The XPW-1075 is compatible with a wide range of DC pool lights on 12V or 24V:
|
Lamp type |
Connection |
Voltage |
|
RGB pool light |
4-wire |
12V / 24V DC |
|
RGBW pool light |
5-wire |
12V / 24V DC |
|
PAR56 replacement lamp |
4- or 5-wire |
12V / 24V DC |
|
Recessed and surface-mounted lights |
4- or 5-wire |
12V / 24V DC |
|
Nicheless pool lights |
4- or 5-wire |
12V / 24V DC |
|
LED strips (DC) |
4- or 5-wire |
12V / 24V DC |
The controller is fully compatible with XPRO PRO LINE pool lights — as well as virtually all other brands of 4- and 5-wire DC pool lighting.
Built-In Power Supply — All-in-One DC Solution
The integrated AC-DC power supply converts mains voltage (AC 110–230V) directly into a stable 12V or 24V DC output. No separate transformer, no extra cabling. This makes installation simpler and more compact, with fewer chances of faults. With a maximum capacity of 200W, the controller is suitable for multiple lamps simultaneously.
IP65 — Protected for Use Near the Pool
The XPW-1075 has an IP65 protection rating — fully protected against dust and water jets from all directions. Suitable for mounting in the immediate vicinity of the pool, even in humid technical rooms. The housing is made of high-quality PC with a toughened glass touch panel for a professional and durable appearance.
Ideal for Smart Upgrade of Existing Installations
The XPW-1075 is the perfect choice for upgrading existing DC pool lighting to a fully smart system. Connect the controller to the existing lights (4- or 5-wire), configure via the app and immediately enjoy full smart control. No major changes to the existing installation required.
Applications
The XPW-1075 Smart Controller is ideal for:
• Private and commercial swimming pools
• Spas and hot tubs
• Wellness and thermal projects
• Fountains with RGB or RGBW lighting
• Water features and water elements
• Smart upgrade of existing DC pool installations
• Professional installations with multiple 12V/24V lights
Benefits and Features
✔ All-in-one: built-in AC-DC power supply — no transformer required
✔ Input AC 110–230V — output 12V or 24V DC
✔ Compatible with RGB (4-wire) and RGBW (5-wire) lamps
✔ Maximum load: 200W
✔ Control via WiFi, Bluetooth, app and RF remote
✔ 7 fixed colours + dynamic programmes
✔ Per-channel R/G/B/W dimming
✔ Synchronisation of multiple lamps
✔ IP65 — safe for use near the pool
✔ Toughened glass touch panel
✔ Compatible with virtually all 12V/24V DC pool lights
✔ Ideal for renovation and smart upgrade
✔ Wireless frequency: 2.4GHz
Technical Specifications
|
Model |
XPW-1075 |
|
Input voltage |
AC 110–230V |
|
Output voltage |
12V / 24V DC |
|
Maximum load |
200W |
|
System |
4-wire RGB / 5-wire RGBW |
|
Wireless frequency |
2.4GHz |
|
Connection |
WiFi + Bluetooth |
|
Control |
Smartphone app (iOS & Android) + RF remote control |
|
IP rating |
IP65 |
|
Housing |
PC with toughened glass touch panel |
|
Mounting |
Wall mounting |
|
Applications |
Pool, spa, fountain, water feature, wellness |
Questions about the XPW-1075 or advice on the right controller for your installation? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED pool lighting, controllers and outdoor lighting
XPW-1075 Smart Controller RGB / RGBW (4- and 5-Wire) — DC 12V/24V
Built-In Power Supply | WiFi & Bluetooth | App Control | 200W | IP65
The XPW-1075 Smart Controller is a powerful and professional all-in-one control unit for DC pool lighting — RGB (4-wire) and RGBW (5-wire). With its built-in power supply, the controller operates directly on AC 110–230V and delivers a stable 12V or 24V DC output — no separate transformer required. Compatible with virtually all DC pool lights, PAR56 lamps, recessed lights and LED strips. Ideal for new installations and smart upgrades of existing pool lighting.
|
IP65 |
WiFi |
Bluetooth |
200W |
12V/24V DC |
App |
Smart Control — Full Control via App and Remote
The XPW-1075 offers extensive smart functionality for maximum atmosphere control:
|
Feature |
Details |
|
Smartphone app |
iOS and Android — colour mixing via colour wheel, programmes and dimming |
|
WiFi connection |
2.4GHz — remote control via home network, also from a distance |
|
Bluetooth |
Direct connection without router — always accessible near the pool |
|
RF remote control |
Included — direct control without smartphone |
|
7 fixed colours |
Quickly selectable via app or remote |
|
Dynamic programmes |
Multiple colour and light programmes adjustable |
|
Per-channel dimming |
Brightness adjustable per R/G/B/W colour channel individually |
|
Speed control |
Transition speed of dynamic programmes adjustable |
|
Synchronisation |
Control and synchronise multiple lamps simultaneously |
Broadly Compatible — Suitable for Virtually All DC Pool Lights
The XPW-1075 is compatible with a wide range of DC pool lights on 12V or 24V:
|
Lamp type |
Connection |
Voltage |
|
RGB pool light |
4-wire |
12V / 24V DC |
|
RGBW pool light |
5-wire |
12V / 24V DC |
|
PAR56 replacement lamp |
4- or 5-wire |
12V / 24V DC |
|
Recessed and surface-mounted lights |
4- or 5-wire |
12V / 24V DC |
|
Nicheless pool lights |
4- or 5-wire |
12V / 24V DC |
|
LED strips (DC) |
4- or 5-wire |
12V / 24V DC |
The controller is fully compatible with XPRO PRO LINE pool lights — as well as virtually all other brands of 4- and 5-wire DC pool lighting.
Built-In Power Supply — All-in-One DC Solution
The integrated AC-DC power supply converts mains voltage (AC 110–230V) directly into a stable 12V or 24V DC output. No separate transformer, no extra cabling. This makes installation simpler and more compact, with fewer chances of faults. With a maximum capacity of 200W, the controller is suitable for multiple lamps simultaneously.
IP65 — Protected for Use Near the Pool
The XPW-1075 has an IP65 protection rating — fully protected against dust and water jets from all directions. Suitable for mounting in the immediate vicinity of the pool, even in humid technical rooms. The housing is made of high-quality PC with a toughened glass touch panel for a professional and durable appearance.
Ideal for Smart Upgrade of Existing Installations
The XPW-1075 is the perfect choice for upgrading existing DC pool lighting to a fully smart system. Connect the controller to the existing lights (4- or 5-wire), configure via the app and immediately enjoy full smart control. No major changes to the existing installation required.
Applications
The XPW-1075 Smart Controller is ideal for:
• Private and commercial swimming pools
• Spas and hot tubs
• Wellness and thermal projects
• Fountains with RGB or RGBW lighting
• Water features and water elements
• Smart upgrade of existing DC pool installations
• Professional installations with multiple 12V/24V lights
Benefits and Features
✔ All-in-one: built-in AC-DC power supply — no transformer required
✔ Input AC 110–230V — output 12V or 24V DC
✔ Compatible with RGB (4-wire) and RGBW (5-wire) lamps
✔ Maximum load: 200W
✔ Control via WiFi, Bluetooth, app and RF remote
✔ 7 fixed colours + dynamic programmes
✔ Per-channel R/G/B/W dimming
✔ Synchronisation of multiple lamps
✔ IP65 — safe for use near the pool
✔ Toughened glass touch panel
✔ Compatible with virtually all 12V/24V DC pool lights
✔ Ideal for renovation and smart upgrade
✔ Wireless frequency: 2.4GHz
Technical Specifications
|
Model |
XPW-1075 |
|
Input voltage |
AC 110–230V |
|
Output voltage |
12V / 24V DC |
|
Maximum load |
200W |
|
System |
4-wire RGB / 5-wire RGBW |
|
Wireless frequency |
2.4GHz |
|
Connection |
WiFi + Bluetooth |
|
Control |
Smartphone app (iOS & Android) + RF remote control |
|
IP rating |
IP65 |
|
Housing |
PC with toughened glass touch panel |
|
Mounting |
Wall mounting |
|
Applications |
Pool, spa, fountain, water feature, wellness |
Questions about the XPW-1075 or advice on the right controller for your installation? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED pool lighting, controllers and outdoor lighting
The XPW-1075 Smart Controller is a powerful and professional all-in-one control unit for DC pool lighting — RGB (4-wire) and RGBW (5-wire). With its built-in power supply, the controller operates directly on AC 110–230V and delivers a stable 12V or 24V DC output — no separate transformer required. Compatible with virtually all DC pool lights, PAR56 lamps, recessed lights and LED strips. Ideal for new installations and smart upgrades of existing pool lighting.
The XPW-1075 Smart Controller is a powerful and professional all-in-one control unit for DC pool lighting — RGB (4-wire) and RGBW (5-wire). With its built-in power supply, the controller operates directly on AC 110–230V and delivers a stable 12V or 24V DC output — no separate transformer required. Compatible with virtually all DC pool lights, PAR56 lamps, recessed lights and LED strips. Ideal for new installations and smart upgrades of existing pool lighting.
The XPW-1075 Smart Controller is a powerful and professional all-in-one control unit for DC pool lighting — RGB (4-wire) and RGBW (5-wire). With its built-in power supply, the controller operates directly on AC 110–230V and delivers a stable 12V or 24V DC output — no separate transformer required. Compatible with virtually all DC pool lights, PAR56 lamps, recessed lights and LED strips. Ideal for new installations and smart upgrades of existing pool lighting.
PRO LINE IP68 FLEX COB LED Strip 10 × 5 mm — 24V — 10W/m
480 LEDs/m | CRI Ra >90 | 750 lm/m | Fully Waterproof | Available to Measure & by the Roll
The PRO LINE IP68 FLEX COB LED Strip is a high-quality, fully waterproof LED strip for professional applications in gardens, swimming pools, spas and wellness environments. With 480 Chip-On-Board (COB) LEDs per metre and an exceptionally compact profile of just 10 × 5 mm, this strip delivers a completely even, dot-free light line with a luxurious matt appearance. Through the innovative dual colour silicone glue extrusion process, the strip is IP68 fully waterproof — suitable for permanent outdoor installations and humid environments. Available to measure and as a complete roll.
|
IP68 |
COB 480/m |
24V DC |
CRI>90 |
750 lm/m |
5 jaar |
COB Technology — Even Light Line Without LED Dots
The PRO LINE FLEX COB strip uses the most advanced LED technology available. A comparison with conventional SMD strips:
|
Property |
Conventional SMD strip |
PRO LINE COB strip |
|
Light emission |
Visible LED dots |
✔ Completely even light line |
|
LED density |
30–120 per metre |
✔ 480 per metre |
|
Appearance |
Dot effect |
✔ Matt, uniform glow |
|
Beam angle |
120° |
✔ 180° |
|
Colour rendering CRI |
Ra 70–80 |
✔ Ra >90 |
|
Profile |
5–10 mm wide |
✔ Only 10 mm wide |
With 480 LEDs per metre and a beam angle of 180°, light distribution is exceptionally even. Ideal for applications where a sleek, professional lighting effect without distracting LED dots is required.
IP68 Fully Waterproof — Dual Colour Silicone Process
Full IP68 waterproofing is achieved through the innovative dual colour silicone glue extrusion process — an advanced manufacturing method in which the LED strip is fully encapsulated in two layers of silicone. This provides maximum protection against water, moisture, chlorine and UV radiation. Suitable for permanent underwater installation in pools, ponds and spas, and for outdoor applications in all weather conditions.
FLEX Design — Easy to Install in Any Profile
The flexible construction makes the strip extremely easy to install in round and angular profiles, edges and mouldings. With a cut length of just 50 mm, the strip can be cut precisely to size for any project. The ultra-thin 10 × 5 mm profile integrates seamlessly into aluminium profiles, stair nosings, pool edges and architectural mouldings.
High Colour Rendering CRI Ra >90
With a CRI Ra >90, this strip renders colours with exceptional accuracy — essential for atmospheric and high-quality garden, terrace and pool lighting. Combined with the 24V DC voltage and the heavy-duty 2OZ copper PCB, voltage drop and heat generation are minimal, even with longer strips.
Applications
The PRO LINE IP68 FLEX COB LED Strip is ideal for:
• Pool edges — inside or under the coping
• Ponds and water features
• Garden paths and terrace edges
• Facade accent lighting and architectural mouldings
• Stair treads indoors and outdoors
• Spa and wellness installations
• Pergolas and canopies
• Aluminium profiles and recessed applications
Available to Measure and by the Roll
The strip is available as a complete roll for larger projects and as custom lengths to your required size. The 50 mm cut length allows precise shortening. Available in single colours and RGB+W for maximum application flexibility.
PRO LINE Quality — Built for Professionals
The PRO LINE series is specially developed for installers, pool builders and garden professionals who demand reliability and durability. The combination of 480 COB LEDs per metre, high CRI Ra>90, stable 24V supply, 2OZ copper PCB and full IP68 waterproofing makes this strip the best choice for long-term and intensive professional applications. With a lifespan of over 50,000 hours and 5-year warranty, the PRO LINE FLEX COB strip offers maximum certainty for every project.
Benefits and Features
✔ FLEX design — easy to bend and install in any profile
✔ COB technology: 480 LEDs/m — completely even dot-free light line
✔ Ultra-thin profile: 10 × 5 mm
✔ 180° beam angle for wide, uniform light distribution
✔ IP68 fully waterproof — dual colour silicone process
✔ CRI Ra >90 — exceptionally high colour rendering
✔ Light output: 750 lm/m | Efficiency: 75 lm/W
✔ Voltage: 24V DC | Power: 10W/m
✔ Copper thickness: 2OZ — minimal voltage drop
✔ Cut length: 50 mm
✔ Available in single colours and RGB+W
✔ Available to measure and by the roll
✔ Lifespan >50,000 hours
✔ 5-year warranty (PRO LINE)
Technical Specifications
|
Dimensions |
10 × 5 mm |
|
LED type |
COB (Chip-On-Board) |
|
LED density |
480 LEDs per metre |
|
Voltage |
24V DC |
|
Power |
10W per metre |
|
Light output |
750 lm/m |
|
Efficiency |
75 lm/W |
|
Beam angle |
180° |
|
CRI |
Ra >90 |
|
Copper thickness |
2OZ |
|
Cut length |
50 mm |
|
IP rating |
IP68 fully waterproof |
|
Operating temperature |
-25°C to +45°C |
|
Lifespan |
>50,000 hours |
|
Versions |
Single colours / RGB+W |
|
Available as |
To measure / complete roll |
|
Warranty |
5 years (PRO LINE) |
Questions about the PRO LINE FLEX COB strip or advice on the right version for your project? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED strips, pool lighting and outdoor lighting
PRO LINE IP68 FLEX COB LED Strip 10 × 5 mm — 24V — 10W/m
480 LEDs/m | CRI Ra >90 | 750 lm/m | Fully Waterproof | Available to Measure & by the Roll
The PRO LINE IP68 FLEX COB LED Strip is a high-quality, fully waterproof LED strip for professional applications in gardens, swimming pools, spas and wellness environments. With 480 Chip-On-Board (COB) LEDs per metre and an exceptionally compact profile of just 10 × 5 mm, this strip delivers a completely even, dot-free light line with a luxurious matt appearance. Through the innovative dual colour silicone glue extrusion process, the strip is IP68 fully waterproof — suitable for permanent outdoor installations and humid environments. Available to measure and as a complete roll.
|
IP68 |
COB 480/m |
24V DC |
CRI>90 |
750 lm/m |
5 jaar |
COB Technology — Even Light Line Without LED Dots
The PRO LINE FLEX COB strip uses the most advanced LED technology available. A comparison with conventional SMD strips:
|
Property |
Conventional SMD strip |
PRO LINE COB strip |
|
Light emission |
Visible LED dots |
✔ Completely even light line |
|
LED density |
30–120 per metre |
✔ 480 per metre |
|
Appearance |
Dot effect |
✔ Matt, uniform glow |
|
Beam angle |
120° |
✔ 180° |
|
Colour rendering CRI |
Ra 70–80 |
✔ Ra >90 |
|
Profile |
5–10 mm wide |
✔ Only 10 mm wide |
With 480 LEDs per metre and a beam angle of 180°, light distribution is exceptionally even. Ideal for applications where a sleek, professional lighting effect without distracting LED dots is required.
IP68 Fully Waterproof — Dual Colour Silicone Process
Full IP68 waterproofing is achieved through the innovative dual colour silicone glue extrusion process — an advanced manufacturing method in which the LED strip is fully encapsulated in two layers of silicone. This provides maximum protection against water, moisture, chlorine and UV radiation. Suitable for permanent underwater installation in pools, ponds and spas, and for outdoor applications in all weather conditions.
FLEX Design — Easy to Install in Any Profile
The flexible construction makes the strip extremely easy to install in round and angular profiles, edges and mouldings. With a cut length of just 50 mm, the strip can be cut precisely to size for any project. The ultra-thin 10 × 5 mm profile integrates seamlessly into aluminium profiles, stair nosings, pool edges and architectural mouldings.
High Colour Rendering CRI Ra >90
With a CRI Ra >90, this strip renders colours with exceptional accuracy — essential for atmospheric and high-quality garden, terrace and pool lighting. Combined with the 24V DC voltage and the heavy-duty 2OZ copper PCB, voltage drop and heat generation are minimal, even with longer strips.
Applications
The PRO LINE IP68 FLEX COB LED Strip is ideal for:
• Pool edges — inside or under the coping
• Ponds and water features
• Garden paths and terrace edges
• Facade accent lighting and architectural mouldings
• Stair treads indoors and outdoors
• Spa and wellness installations
• Pergolas and canopies
• Aluminium profiles and recessed applications
Available to Measure and by the Roll
The strip is available as a complete roll for larger projects and as custom lengths to your required size. The 50 mm cut length allows precise shortening. Available in single colours and RGB+W for maximum application flexibility.
PRO LINE Quality — Built for Professionals
The PRO LINE series is specially developed for installers, pool builders and garden professionals who demand reliability and durability. The combination of 480 COB LEDs per metre, high CRI Ra>90, stable 24V supply, 2OZ copper PCB and full IP68 waterproofing makes this strip the best choice for long-term and intensive professional applications. With a lifespan of over 50,000 hours and 5-year warranty, the PRO LINE FLEX COB strip offers maximum certainty for every project.
Benefits and Features
✔ FLEX design — easy to bend and install in any profile
✔ COB technology: 480 LEDs/m — completely even dot-free light line
✔ Ultra-thin profile: 10 × 5 mm
✔ 180° beam angle for wide, uniform light distribution
✔ IP68 fully waterproof — dual colour silicone process
✔ CRI Ra >90 — exceptionally high colour rendering
✔ Light output: 750 lm/m | Efficiency: 75 lm/W
✔ Voltage: 24V DC | Power: 10W/m
✔ Copper thickness: 2OZ — minimal voltage drop
✔ Cut length: 50 mm
✔ Available in single colours and RGB+W
✔ Available to measure and by the roll
✔ Lifespan >50,000 hours
✔ 5-year warranty (PRO LINE)
Technical Specifications
|
Dimensions |
10 × 5 mm |
|
LED type |
COB (Chip-On-Board) |
|
LED density |
480 LEDs per metre |
|
Voltage |
24V DC |
|
Power |
10W per metre |
|
Light output |
750 lm/m |
|
Efficiency |
75 lm/W |
|
Beam angle |
180° |
|
CRI |
Ra >90 |
|
Copper thickness |
2OZ |
|
Cut length |
50 mm |
|
IP rating |
IP68 fully waterproof |
|
Operating temperature |
-25°C to +45°C |
|
Lifespan |
>50,000 hours |
|
Versions |
Single colours / RGB+W |
|
Available as |
To measure / complete roll |
|
Warranty |
5 years (PRO LINE) |
Questions about the PRO LINE FLEX COB strip or advice on the right version for your project? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED strips, pool lighting and outdoor lighting
The PRO LINE IP68 FLEX COB LED Strip is a high-quality, fully waterproof LED strip for professional applications in gardens, swimming pools, spas and wellness environments. With 480 Chip-On-Board (COB) LEDs per metre and an exceptionally compact profile of just 10 × 5 mm, this strip delivers a completely even, dot-free light line with a luxurious matt appearance. Through the innovative dual colour silicone glue extrusion process, the strip is IP68 fully waterproof — suitable for permanent outdoor installations and humid environments. Available to measure and as a complete roll.
The PRO LINE IP68 FLEX COB LED Strip is a high-quality, fully waterproof LED strip for professional applications in gardens, swimming pools, spas and wellness environments. With 480 Chip-On-Board (COB) LEDs per metre and an exceptionally compact profile of just 10 × 5 mm, this strip delivers a completely even, dot-free light line with a luxurious matt appearance. Through the innovative dual colour silicone glue extrusion process, the strip is IP68 fully waterproof — suitable for permanent outdoor installations and humid environments. Available to measure and as a complete roll.
The PRO LINE IP68 FLEX COB LED Strip is a high-quality, fully waterproof LED strip for professional applications in gardens, swimming pools, spas and wellness environments. With 480 Chip-On-Board (COB) LEDs per metre and an exceptionally compact profile of just 10 × 5 mm, this strip delivers a completely even, dot-free light line with a luxurious matt appearance. Through the innovative dual colour silicone glue extrusion process, the strip is IP68 fully waterproof — suitable for permanent outdoor installations and humid environments. Available to measure and as a complete roll.
XPR-1072 PRO LINE Premium Smart RGB-W Controller (2-Wire Upgrade System)
Stepless Colour Control | WiFi & Bluetooth 5.2 Mesh | Tuya App | 4.3" Touchscreen | 400W | IP65
The XPR-1072 PRO LINE Premium Smart Controller is the most advanced 2-wire pool control system that XPRO POOL supplies. Specially developed for professional pool builders, installers and renovation specialists who want to achieve the full colour precision of a 4- or 5-wire system — without new cabling. With built-in Bluetooth 5.2 Mesh, WiFi and Tuya Smart App control via a professional 4.3-inch capacitive touchscreen, this is the ultimate choice for premium pool projects.
|
IP65 |
BT 5.2 Mesh |
WiFi |
400W |
Tuya App |
4.3" Touch |
Full Stepless RGB-W Colour Control — via 2 Wires
The revolutionary aspect of the XPR-1072 is fully stepless colour control via the existing 2-wire system. Standard 2-wire controllers only offer a limited number of fixed colours via switching patterns. The XPR-1072 breaks this barrier — thanks to the intelligent communication chip in the PRO LINE lamps, colours can be mixed completely steplessly, just like a classic 4- or 5-wire RGB-W system.
Comparison XPR-1072 vs standard 2-wire controller:
|
Property |
Standard 2-wire |
XPR-1072 PRO LINE |
|
Colour control |
Limited — fixed colours |
✔ Fully stepless — millions of colours |
|
Colour precision |
Steps/jumps |
✔ Smooth transitions |
|
Dimming |
Limited or none |
✔ Steplessly dimmable |
|
White colour temperature |
Not adjustable |
✔ Fully adjustable |
|
Control |
Simple RF |
✔ App + Mesh + Touchscreen |
|
Cabling |
2-wire |
✔ 2-wire (existing retained) |
Ideal for Pool Renovation — Upgrade Without Structural Work
The XPR-1072 is specifically designed as an upgrade solution for renovation projects. The existing 2-wire cabling in the pool is fully utilised — no new conduits, no structural work, no expensive construction changes. Replace the existing lamps with XPRO PRO LINE models, connect the XPR-1072 and the pool immediately has fully professional, stepless smart lighting.
Exclusive PRO LINE Ecosystem
The XPR-1072 works exclusively with XPRO PRO LINE pool lights equipped with an integrated intelligent communication chip. This closed ecosystem guarantees perfect synchronisation, maximum reliability and optimal performance. All PRO LINE lamps — from recessed spotlights to nicheless models — are compatible. The result is one stable, professional and future-proof pool lighting system.
Smart Control — Full Control
The XPR-1072 offers the most complete control options in the PRO LINE controller range:
|
Feature |
Details |
|
4.3" touchscreen |
Capacitive, 480 × 272 pixels — professional and intuitive control panel |
|
Tuya Smart App |
iOS and Android — full control via smartphone, also remotely |
|
WiFi |
2.4GHz — control via home network |
|
Bluetooth 5.2 Mesh |
Direct without router — reliable connection in humid environments |
|
Millions of colours |
Stepless colour picker via app or touchscreen |
|
Stepless dimming |
Per lamp or group — from fully off to maximum brightness |
|
Dynamic programmes |
Speed, transition effects and scenes precisely adjustable |
|
Timer |
Automatic on/off at set times |
|
Scene storage |
Save and recall favourite colour/light combinations |
|
Synchronisation |
Control multiple lamps perfectly simultaneously |
4.3-inch Professional Touchscreen
The built-in 4.3-inch capacitive touchscreen (480 × 272 pixels) sets the XPR-1072 apart from all other controllers in its class. The large, bright display provides a clear interface for direct control near the technical room or pool. No small buttons, no complex menus — intuitive control for both installer and end user.
IP65 — For Professional Installations
The XPR-1072 has an IP65 protection rating — fully protected against dust and water jets. Suitable for mounting in the technical room of the pool or in the direct outdoor environment. The housing measures 152 × 208 × 82 mm and is wall-mounted.
Applications
The XPR-1072 PRO LINE Premium is the choice for demanding professionals:
• Renovation of existing pools — upgrade without structural work
• New-build luxury private pools
• Commercial pools — hotels, resorts, wellness centres
• Spas and thermal baths
• Event pools and special water installations
• Premium pool projects with multiple lamps
Benefits and Features
✔ Fully stepless RGB-W colour control via 2-wire system
✔ Same colour performance as a 4- or 5-wire system
✔ Upgrade existing installation without new cables or structural work
✔ Exclusive PRO LINE ecosystem — perfect synchronisation guaranteed
✔ 4.3-inch capacitive touchscreen (480 × 272 px)
✔ Tuya Smart App — iOS & Android
✔ WiFi + Bluetooth 5.2 Mesh
✔ Maximum power: 400W
✔ Millions of colours, stepless dimming, timer, scenes
✔ RF frequency: 433 MHz | Wireless: 2.4 GHz
✔ IP65 protection
✔ Dimensions: 152 × 208 × 82 mm
✔ Professional quality for intensive use
Technical Specifications
|
Model |
XPR-1072 |
|
Series |
PRO LINE Premium |
|
Supply voltage |
AC 12V |
|
Maximum power |
400W |
|
System |
2-wire intelligent communication system |
|
Display |
4.3-inch capacitive touchscreen (480 × 272) |
|
Connection |
WiFi 2.4GHz + Bluetooth 5.2 Mesh |
|
App |
Tuya Smart (iOS & Android) |
|
RF frequency |
433 MHz |
|
Wireless transmission |
2.4 GHz |
|
IP rating |
IP65 |
|
Dimensions |
152 × 208 × 82 mm |
|
Mounting |
Wall mounting |
|
Compatibility |
Exclusively XPRO PRO LINE lamps |
|
Applications |
Pool, spa, wellness, renovation |
Questions about the XPR-1072 or advice on the PRO LINE upgrade system? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED pool lighting, PRO LINE controllers and renovation systems
XPR-1072 PRO LINE Premium Smart RGB-W Controller (2-Wire Upgrade System)
Stepless Colour Control | WiFi & Bluetooth 5.2 Mesh | Tuya App | 4.3" Touchscreen | 400W | IP65
The XPR-1072 PRO LINE Premium Smart Controller is the most advanced 2-wire pool control system that XPRO POOL supplies. Specially developed for professional pool builders, installers and renovation specialists who want to achieve the full colour precision of a 4- or 5-wire system — without new cabling. With built-in Bluetooth 5.2 Mesh, WiFi and Tuya Smart App control via a professional 4.3-inch capacitive touchscreen, this is the ultimate choice for premium pool projects.
|
IP65 |
BT 5.2 Mesh |
WiFi |
400W |
Tuya App |
4.3" Touch |
Full Stepless RGB-W Colour Control — via 2 Wires
The revolutionary aspect of the XPR-1072 is fully stepless colour control via the existing 2-wire system. Standard 2-wire controllers only offer a limited number of fixed colours via switching patterns. The XPR-1072 breaks this barrier — thanks to the intelligent communication chip in the PRO LINE lamps, colours can be mixed completely steplessly, just like a classic 4- or 5-wire RGB-W system.
Comparison XPR-1072 vs standard 2-wire controller:
|
Property |
Standard 2-wire |
XPR-1072 PRO LINE |
|
Colour control |
Limited — fixed colours |
✔ Fully stepless — millions of colours |
|
Colour precision |
Steps/jumps |
✔ Smooth transitions |
|
Dimming |
Limited or none |
✔ Steplessly dimmable |
|
White colour temperature |
Not adjustable |
✔ Fully adjustable |
|
Control |
Simple RF |
✔ App + Mesh + Touchscreen |
|
Cabling |
2-wire |
✔ 2-wire (existing retained) |
Ideal for Pool Renovation — Upgrade Without Structural Work
The XPR-1072 is specifically designed as an upgrade solution for renovation projects. The existing 2-wire cabling in the pool is fully utilised — no new conduits, no structural work, no expensive construction changes. Replace the existing lamps with XPRO PRO LINE models, connect the XPR-1072 and the pool immediately has fully professional, stepless smart lighting.
Exclusive PRO LINE Ecosystem
The XPR-1072 works exclusively with XPRO PRO LINE pool lights equipped with an integrated intelligent communication chip. This closed ecosystem guarantees perfect synchronisation, maximum reliability and optimal performance. All PRO LINE lamps — from recessed spotlights to nicheless models — are compatible. The result is one stable, professional and future-proof pool lighting system.
Smart Control — Full Control
The XPR-1072 offers the most complete control options in the PRO LINE controller range:
|
Feature |
Details |
|
4.3" touchscreen |
Capacitive, 480 × 272 pixels — professional and intuitive control panel |
|
Tuya Smart App |
iOS and Android — full control via smartphone, also remotely |
|
WiFi |
2.4GHz — control via home network |
|
Bluetooth 5.2 Mesh |
Direct without router — reliable connection in humid environments |
|
Millions of colours |
Stepless colour picker via app or touchscreen |
|
Stepless dimming |
Per lamp or group — from fully off to maximum brightness |
|
Dynamic programmes |
Speed, transition effects and scenes precisely adjustable |
|
Timer |
Automatic on/off at set times |
|
Scene storage |
Save and recall favourite colour/light combinations |
|
Synchronisation |
Control multiple lamps perfectly simultaneously |
4.3-inch Professional Touchscreen
The built-in 4.3-inch capacitive touchscreen (480 × 272 pixels) sets the XPR-1072 apart from all other controllers in its class. The large, bright display provides a clear interface for direct control near the technical room or pool. No small buttons, no complex menus — intuitive control for both installer and end user.
IP65 — For Professional Installations
The XPR-1072 has an IP65 protection rating — fully protected against dust and water jets. Suitable for mounting in the technical room of the pool or in the direct outdoor environment. The housing measures 152 × 208 × 82 mm and is wall-mounted.
Applications
The XPR-1072 PRO LINE Premium is the choice for demanding professionals:
• Renovation of existing pools — upgrade without structural work
• New-build luxury private pools
• Commercial pools — hotels, resorts, wellness centres
• Spas and thermal baths
• Event pools and special water installations
• Premium pool projects with multiple lamps
Benefits and Features
✔ Fully stepless RGB-W colour control via 2-wire system
✔ Same colour performance as a 4- or 5-wire system
✔ Upgrade existing installation without new cables or structural work
✔ Exclusive PRO LINE ecosystem — perfect synchronisation guaranteed
✔ 4.3-inch capacitive touchscreen (480 × 272 px)
✔ Tuya Smart App — iOS & Android
✔ WiFi + Bluetooth 5.2 Mesh
✔ Maximum power: 400W
✔ Millions of colours, stepless dimming, timer, scenes
✔ RF frequency: 433 MHz | Wireless: 2.4 GHz
✔ IP65 protection
✔ Dimensions: 152 × 208 × 82 mm
✔ Professional quality for intensive use
Technical Specifications
|
Model |
XPR-1072 |
|
Series |
PRO LINE Premium |
|
Supply voltage |
AC 12V |
|
Maximum power |
400W |
|
System |
2-wire intelligent communication system |
|
Display |
4.3-inch capacitive touchscreen (480 × 272) |
|
Connection |
WiFi 2.4GHz + Bluetooth 5.2 Mesh |
|
App |
Tuya Smart (iOS & Android) |
|
RF frequency |
433 MHz |
|
Wireless transmission |
2.4 GHz |
|
IP rating |
IP65 |
|
Dimensions |
152 × 208 × 82 mm |
|
Mounting |
Wall mounting |
|
Compatibility |
Exclusively XPRO PRO LINE lamps |
|
Applications |
Pool, spa, wellness, renovation |
Questions about the XPR-1072 or advice on the PRO LINE upgrade system? Contact us at info@xpropool.com.
www.xpropool.com • Specialist in professional LED pool lighting, PRO LINE controllers and renovation systems
The XPR-1072 PRO LINE Premium Smart Controller is the most advanced 2-wire pool control system that XPRO POOL supplies. Specially developed for professional pool builders, installers and renovation specialists who want to achieve the full colour precision of a 4- or 5-wire system — without new cabling. With built-in Bluetooth 5.2 Mesh, WiFi and Tuya Smart App control via a professional 4.3-inch capacitive touchscreen, this is the ultimate choice for premium pool projects.
The XPR-1072 PRO LINE Premium Smart Controller is the most advanced 2-wire pool control system that XPRO POOL supplies. Specially developed for professional pool builders, installers and renovation specialists who want to achieve the full colour precision of a 4- or 5-wire system — without new cabling. With built-in Bluetooth 5.2 Mesh, WiFi and Tuya Smart App control via a professional 4.3-inch capacitive touchscreen, this is the ultimate choice for premium pool projects.
The XPR-1072 PRO LINE Premium Smart Controller is the most advanced 2-wire pool control system that XPRO POOL supplies. Specially developed for professional pool builders, installers and renovation specialists who want to achieve the full colour precision of a 4- or 5-wire system — without new cabling. With built-in Bluetooth 5.2 Mesh, WiFi and Tuya Smart App control via a professional 4.3-inch capacitive touchscreen, this is the ultimate choice for premium pool projects.
This 2-wire RGB controller for pool lights is designed for reliable and stable control of LED pool lighting. The controller ensures proper synchronisation of colours and lighting programs, allowing multiple pool lights to operate simultaneously in the same colour and mode.
All XPRO Pool PRO LINE pool lights are fully compatible with this controller, making it an ideal solution for new installations as well as for expansion or replacement within existing PRO LINE lighting systems.
Control is handled via a wireless remote control, allowing easy selection of fixed colours and dynamic colour-changing programs. Thanks to its compact design and straightforward wiring, the controller is quick and easy to install.
This controller is specifically developed for 2-wire RGB pool lights and is widely used in professional pool installations where reliability, ease of use and a clean installation are essential.
Key features
✔️ Suitable for 2-wire RGB pool lights
✔️ Compatible with all XPRO Pool PRO LINE lights
✔️ Synchronized colour and lighting modes
✔️ Wireless remote control
✔️ Selection of fixed colours and colour-changing programs
✔️ Compact and easy to install
✔️ Reliable and stable operation
Application
Suitable for:
-
XPRO Pool PRO LINE LED pool lights
-
Pool installations with multiple synchronized lights
-
New pool projects and renovations
Installation & use
The controller is installed between the power supply and the connected pool light(s). Colours and lighting programs can be easily selected using the supplied remote control. For safe and correct operation, professional installation and the use of a suitable transformer are recommended.
Warranty
This controller is supplied with a 2-year warranty.
The warranty covers manufacturing and material defects under normal use and professional installation.
This 2-wire RGB controller for pool lights is designed for reliable and stable control of LED pool lighting. The controller ensures proper synchronisation of colours and lighting programs, allowing multiple pool lights to operate simultaneously in the same colour and mode.
All XPRO Pool PRO LINE pool lights are fully compatible with this controller, making it an ideal solution for new installations as well as for expansion or replacement within existing PRO LINE lighting systems.
Control is handled via a wireless remote control, allowing easy selection of fixed colours and dynamic colour-changing programs. Thanks to its compact design and straightforward wiring, the controller is quick and easy to install.
This controller is specifically developed for 2-wire RGB pool lights and is widely used in professional pool installations where reliability, ease of use and a clean installation are essential.
Key features
✔️ Suitable for 2-wire RGB pool lights
✔️ Compatible with all XPRO Pool PRO LINE lights
✔️ Synchronized colour and lighting modes
✔️ Wireless remote control
✔️ Selection of fixed colours and colour-changing programs
✔️ Compact and easy to install
✔️ Reliable and stable operation
Application
Suitable for:
-
XPRO Pool PRO LINE LED pool lights
-
Pool installations with multiple synchronized lights
-
New pool projects and renovations
Installation & use
The controller is installed between the power supply and the connected pool light(s). Colours and lighting programs can be easily selected using the supplied remote control. For safe and correct operation, professional installation and the use of a suitable transformer are recommended.
Warranty
This controller is supplied with a 2-year warranty.
The warranty covers manufacturing and material defects under normal use and professional installation.
This 2-wire RGB controller for pool lights is designed for reliable and stable control of LED pool lighting. The controller ensures proper synchronisation of colours and lighting programs, allowing multiple pool lights to operate simultaneously in the same colour and mode.
This 2-wire RGB controller for pool lights is designed for reliable and stable control of LED pool lighting. The controller ensures proper synchronisation of colours and lighting programs, allowing multiple pool lights to operate simultaneously in the same colour and mode.
This 2-wire RGB controller for pool lights is designed for reliable and stable control of LED pool lighting. The controller ensures proper synchronisation of colours and lighting programs, allowing multiple pool lights to operate simultaneously in the same colour and mode.









































