Nicheless LED Pool Light 1.5 inch RGB – 12V AC – 8W / 12W

The nicheless LED pool light 1.5 inch RGB 12V is a powerful and energy-efficient solution for pools, spas and bubblers. This compact light fits directly into standard 1.5 inch PVC wall fittings and is suitable for concrete, liner, fiberglass and Gunite pools.

High-quality CREE LEDs deliver 800 to 1200 lumen. The RGB version offers vivid color effects. The single color version provides strong white illumination.

The unit is fully resin-filled and IP68 waterproof for maximum durability and resistance against chemicals and UV exposure.

Key benefits

Fits standard 1.5 inch wall fittings
Safe 12V AC low voltage system
Available in RGB or single color
Power 8W or 12W
800 – 1200 lumen output
Fully resin-filled IP68 waterproof
Lifetime up to ±40,000 hours
2 year warranty

Compatibility

Designed as a replacement for niche lights including Jandy®, Hayward® and Pentair®. Suitable for renovation and new pool installations.

Technical specifications

Size 51 × 111 mm
Voltage AC 12V
Power 8W / 12W
Beam angle 80°
LED type CREE
Cable length 2 meters
Waterproof IP68
Operating temperature −25°C to +45°C
Material Resin filled | Anti UV PC
Energy class A+

Installation

Install directly into a 1.5 inch fitting. Recommended depth is 55–70 cm below water level. Use a suitable 12V AC transformer.

Important

Do not test longer than 45 seconds outside water. Transformer not included.

Nicheless LED Pool Light 1.5 inch RGB – 12V AC – 8W / 12W

The nicheless LED pool light 1.5 inch RGB 12V is a powerful and energy-efficient solution for pools, spas and bubblers. This compact light fits directly into standard 1.5 inch PVC wall fittings and is suitable for concrete, liner, fiberglass and Gunite pools.

High-quality CREE LEDs deliver 800 to 1200 lumen. The RGB version offers vivid color effects. The single color version provides strong white illumination.

The unit is fully resin-filled and IP68 waterproof for maximum durability and resistance against chemicals and UV exposure.

Key benefits

Fits standard 1.5 inch wall fittings
Safe 12V AC low voltage system
Available in RGB or single color
Power 8W or 12W
800 – 1200 lumen output
Fully resin-filled IP68 waterproof
Lifetime up to ±40,000 hours
2 year warranty

Compatibility

Designed as a replacement for niche lights including Jandy®, Hayward® and Pentair®. Suitable for renovation and new pool installations.

Technical specifications

Size 51 × 111 mm
Voltage AC 12V
Power 8W / 12W
Beam angle 80°
LED type CREE
Cable length 2 meters
Waterproof IP68
Operating temperature −25°C to +45°C
Material Resin filled | Anti UV PC
Energy class A+

Installation

Install directly into a 1.5 inch fitting. Recommended depth is 55–70 cm below water level. Use a suitable 12V AC transformer.

Important

Do not test longer than 45 seconds outside water. Transformer not included.

ABS Nicheless Pool Light 100x53mm 12V IP68

The ABS nicheless pool light 100x53mm is a compact and energy-efficient LED solution for swimming pools and spas. This 12V pool light screws directly into a standard 1.5 inch wall fitting. The ultra slim 23 mm profile creates a clean and modern finish.

The light is suitable for liner, fiberglass and concrete pools. The fully resin-filled housing makes the unit completely waterproof. The IP68 rating guarantees safe permanent underwater use. All materials resist chlorine, salt water and UV exposure.

Versions

Single color white
RGB multicolor
RGB+W
Smart wifi compatible

Technical specifications

Size 100 x 53 mm
Thickness 23 mm
Voltage 12V AC / DC
Power 6 Watt
LED quantity 99 pcs
LED type Epsper 2835
Beam angle 120°
Luminous flux white 800 lumen
Luminous flux RGB 550 lumen
Waterproof IP68
Cable 2 meters
Operating temperature −25°C to +45°C
Lifetime ±40,000 hours
2 year warranty

Installation

Screw directly into a 1.5 inch fitting. Always use a suitable 12V transformer. Recommended installation depth is 55–70 cm below water level. Do not test longer than 45 seconds outside water.

ABS Nicheless Pool Light 100x53mm 12V IP68

The ABS nicheless pool light 100x53mm is a compact and energy-efficient LED solution for swimming pools and spas. This 12V pool light screws directly into a standard 1.5 inch wall fitting. The ultra slim 23 mm profile creates a clean and modern finish.

The light is suitable for liner, fiberglass and concrete pools. The fully resin-filled housing makes the unit completely waterproof. The IP68 rating guarantees safe permanent underwater use. All materials resist chlorine, salt water and UV exposure.

Versions

Single color white
RGB multicolor
RGB+W
Smart wifi compatible

Technical specifications

Size 100 x 53 mm
Thickness 23 mm
Voltage 12V AC / DC
Power 6 Watt
LED quantity 99 pcs
LED type Epsper 2835
Beam angle 120°
Luminous flux white 800 lumen
Luminous flux RGB 550 lumen
Waterproof IP68
Cable 2 meters
Operating temperature −25°C to +45°C
Lifetime ±40,000 hours
2 year warranty

Installation

Screw directly into a 1.5 inch fitting. Always use a suitable 12V transformer. Recommended installation depth is 55–70 cm below water level. Do not test longer than 45 seconds outside water.

12V 360W DC Power Supply for LED Pool Lighting – 30A Professional

The 12V 360W power supply for LED pool lighting is a high-performance regulated transformer for higher power installations. It delivers a stable 12V DC output and supports systems up to 360 watts.

The electronically stabilized output prevents voltage fluctuations and current peaks. This protects LED pool lights and other 12V applications from damage. It ensures longer lifespan and constant light output.

With a maximum output current of 30A, this power supply is ideal for larger installations such as multiple pool lights, LED strips or professional garden lighting systems.

Main features

Stable 12V DC output
Maximum power 360W
Maximum current 30A
Efficiency 85 percent
Wide input voltage range 85–264VAC
Electronically regulated
Automatic protection against overload, overvoltage and overheating
CE, RoHS, FCC and ISO9001 certified

Technical specifications

DC output voltage 12V
Output current 30A
Ripple and noise 80mV
Voltage regulation ±0.5 percent
Voltage tolerance ±2 percent
Load regulation ±1 percent
Input voltage 85–264VAC
Frequency 47–63Hz
Operating temperature −10°C to +60°C

This power supply is ideal for professional LED pool lighting installations requiring stable and secure power.

12V 360W DC Power Supply for LED Pool Lighting – 30A Professional

The 12V 360W power supply for LED pool lighting is a high-performance regulated transformer for higher power installations. It delivers a stable 12V DC output and supports systems up to 360 watts.

The electronically stabilized output prevents voltage fluctuations and current peaks. This protects LED pool lights and other 12V applications from damage. It ensures longer lifespan and constant light output.

With a maximum output current of 30A, this power supply is ideal for larger installations such as multiple pool lights, LED strips or professional garden lighting systems.

Main features

Stable 12V DC output
Maximum power 360W
Maximum current 30A
Efficiency 85 percent
Wide input voltage range 85–264VAC
Electronically regulated
Automatic protection against overload, overvoltage and overheating
CE, RoHS, FCC and ISO9001 certified

Technical specifications

DC output voltage 12V
Output current 30A
Ripple and noise 80mV
Voltage regulation ±0.5 percent
Voltage tolerance ±2 percent
Load regulation ±1 percent
Input voltage 85–264VAC
Frequency 47–63Hz
Operating temperature −10°C to +60°C

This power supply is ideal for professional LED pool lighting installations requiring stable and secure power.

12V 150W DC Power Supply for LED Pool Lighting – 12.5A Professional

The 12V 150W power supply for LED pool lighting is a professionally regulated transformer for reliable 12V DC installations. It delivers a stable 12V DC output and supports systems up to 150 watts.

The electronically stabilized output prevents voltage spikes and current fluctuations. This protects LED pool lights, LED strips and other 12V applications. It ensures longer lifespan and consistent light output.

With a maximum output current of 12.5A, this power supply is suitable for medium-sized LED installations.

Main features

Stable 12V DC output
Maximum power 150W
Maximum current 12.5A
Efficiency 85 percent
Wide input voltage range 85–264VAC
Electronically regulated
Automatic protection against overload, overvoltage and overheating
CE, RoHS, FCC and ISO9001 certified

Technical specifications

Output voltage 12V DC
Output current 12.5A
Ripple and noise 80mV
Voltage regulation ±0.5 percent
Voltage tolerance ±2 percent
Load regulation ±1 percent
Input voltage 85–264VAC
Frequency 47–63Hz
Operating temperature −10°C to +60°C

Ideal for LED pool lighting and professional 12V DC applications requiring stability and safety.

12V 150W DC Power Supply for LED Pool Lighting – 12.5A Professional

The 12V 150W power supply for LED pool lighting is a professionally regulated transformer for reliable 12V DC installations. It delivers a stable 12V DC output and supports systems up to 150 watts.

The electronically stabilized output prevents voltage spikes and current fluctuations. This protects LED pool lights, LED strips and other 12V applications. It ensures longer lifespan and consistent light output.

With a maximum output current of 12.5A, this power supply is suitable for medium-sized LED installations.

Main features

Stable 12V DC output
Maximum power 150W
Maximum current 12.5A
Efficiency 85 percent
Wide input voltage range 85–264VAC
Electronically regulated
Automatic protection against overload, overvoltage and overheating
CE, RoHS, FCC and ISO9001 certified

Technical specifications

Output voltage 12V DC
Output current 12.5A
Ripple and noise 80mV
Voltage regulation ±0.5 percent
Voltage tolerance ±2 percent
Load regulation ±1 percent
Input voltage 85–264VAC
Frequency 47–63Hz
Operating temperature −10°C to +60°C

Ideal for LED pool lighting and professional 12V DC applications requiring stability and safety.

Plug-and-Play LED Pool Light Stainless Steel 316L – 9W – Ø62 mm – IP68

The Plug-and-Play LED pool light stainless steel 316L is designed for fast installation and easy replacement. The integrated click connector allows direct cable connection without heat shrink or resin. This reduces installation time and prevents wiring errors.

This new series is produced on order and is not kept in stock. Longer cable lengths are available on request to match your pool installation requirements.

The light operates on safe 12V DC low voltage and is fully resin filled. Internal electronics are protected against water and moisture. The IP68 rating guarantees permanent underwater use.

The housing is made of stainless steel 316L combined with Anti-UV PC. This material resists chlorine, saltwater and UV exposure. The ultra slim 13 mm thickness ensures a modern finish.

Available in warm white or RGB.
Warm white uses a 2-wire connection.
RGB uses a 4-wire system compatible with wifi controllers.

Technical specifications

Size Ø62 x H48 mm
Power 9 Watt
Voltage 12V DC
IP68 waterproof
Beam angle 120°
Operating temperature −25°C to +45°C
LED type SMD2835 (EPISTAR)
Cable length 2.5 meters
Energy class A+
Material Stainless steel 316L | Anti UV PC
Lifetime ± 40,000 hours
2 year warranty

Important:
Do not test outside water for more than 30 seconds.
Transformer not included.

Plug-and-Play LED Pool Light Stainless Steel 316L – 9W – Ø62 mm – IP68

The Plug-and-Play LED pool light stainless steel 316L is designed for fast installation and easy replacement. The integrated click connector allows direct cable connection without heat shrink or resin. This reduces installation time and prevents wiring errors.

This new series is produced on order and is not kept in stock. Longer cable lengths are available on request to match your pool installation requirements.

The light operates on safe 12V DC low voltage and is fully resin filled. Internal electronics are protected against water and moisture. The IP68 rating guarantees permanent underwater use.

The housing is made of stainless steel 316L combined with Anti-UV PC. This material resists chlorine, saltwater and UV exposure. The ultra slim 13 mm thickness ensures a modern finish.

Available in warm white or RGB.
Warm white uses a 2-wire connection.
RGB uses a 4-wire system compatible with wifi controllers.

Technical specifications

Size Ø62 x H48 mm
Power 9 Watt
Voltage 12V DC
IP68 waterproof
Beam angle 120°
Operating temperature −25°C to +45°C
LED type SMD2835 (EPISTAR)
Cable length 2.5 meters
Energy class A+
Material Stainless steel 316L | Anti UV PC
Lifetime ± 40,000 hours
2 year warranty

Important:
Do not test outside water for more than 30 seconds.
Transformer not included.

Plug-and-Play LED Pool Light Ø125 mm – 9W – IP68 – 12V DC

The Plug-and-Play LED pool light Ø125 mm is designed for fast installation and easy replacement. The integrated click connector allows direct cable connection without heat shrink tubing or resin. This reduces installation time and prevents wiring errors.

This new series is produced on order and is not kept in stock. Longer cable lengths are available on request to match your pool installation requirements.

The light operates on safe 12V DC low voltage and is fully resin filled. Internal electronics are protected against water and moisture. The IP68 rating guarantees permanent underwater use.

The housing is made of fully resin-filled ABS with Anti-UV PC protection. This material resists chlorine, saltwater and UV exposure. The ultra slim 13 mm thickness ensures a modern finish.

Available in warm white or RGB.
Warm white uses a 2-wire connection.
RGB uses a 4-wire system compatible with wifi controllers.

Technical specifications

Size Ø125 x H48 mm
Power 9 Watt
Voltage 12V DC
IP68 waterproof
Beam angle 120°
Operating temperature −25°C to +45°C
LED type SMD2835 (EPISTAR)
Cable length 2.5 meters
Energy class A+
Material resin-filled ABS | Anti UV PC
Lifetime ± 40,000 hours
2 year warranty

Important:
Do not test outside water for more than 30 seconds.
Transformer not included.

Plug-and-Play LED Pool Light Ø125 mm – 9W – IP68 – 12V DC

The Plug-and-Play LED pool light Ø125 mm is designed for fast installation and easy replacement. The integrated click connector allows direct cable connection without heat shrink tubing or resin. This reduces installation time and prevents wiring errors.

This new series is produced on order and is not kept in stock. Longer cable lengths are available on request to match your pool installation requirements.

The light operates on safe 12V DC low voltage and is fully resin filled. Internal electronics are protected against water and moisture. The IP68 rating guarantees permanent underwater use.

The housing is made of fully resin-filled ABS with Anti-UV PC protection. This material resists chlorine, saltwater and UV exposure. The ultra slim 13 mm thickness ensures a modern finish.

Available in warm white or RGB.
Warm white uses a 2-wire connection.
RGB uses a 4-wire system compatible with wifi controllers.

Technical specifications

Size Ø125 x H48 mm
Power 9 Watt
Voltage 12V DC
IP68 waterproof
Beam angle 120°
Operating temperature −25°C to +45°C
LED type SMD2835 (EPISTAR)
Cable length 2.5 meters
Energy class A+
Material resin-filled ABS | Anti UV PC
Lifetime ± 40,000 hours
2 year warranty

Important:
Do not test outside water for more than 30 seconds.
Transformer not included.

Looking for an easy-to-mount light in your fibreglass pool?   This model is not big but gives good light.

Available in single colours and RGB.

Specifications

- Fully resin filled, 100% waterproof

- Ultra slim design in 12 mm thickness

- 2 wire external or 4 

- Size φ169*H70 mm

- Voltage : 12/24V AC/DC

- Waterproof grade: IP68

- Beam angle: 120°

- Working environment temperature : -25°C~45°C

- Wattage : 18W/25W/35W

- Brand leds : Epsper 2835

- Light colour : Warm white / RGB / 

- Cable length : 2.5 metres

- Energy class : +A

- Material : Fully resin filled plastic | Anti UV PC

- Option also works with wifi control system

- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours 

- Two-year warranty

Quality pool lights

At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.

If you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is a lot better than working out the entire installation instruction on this online shop. We will be happy to advise you.

IMPORTANT 

- The product should not be tested out of the water for more than 30 seconds. 

- No transformer is included.

Looking for an easy-to-mount light in your fibreglass pool?   This model is not big but gives good light.

Available in single colours and RGB.

Specifications

- Fully resin filled, 100% waterproof

- Ultra slim design in 12 mm thickness

- 2 wire external or 4 

- Size φ169*H70 mm

- Voltage : 12/24V AC/DC

- Waterproof grade: IP68

- Beam angle: 120°

- Working environment temperature : -25°C~45°C

- Wattage : 18W/25W/35W

- Brand leds : Epsper 2835

- Light colour : Warm white / RGB / 

- Cable length : 2.5 metres

- Energy class : +A

- Material : Fully resin filled plastic | Anti UV PC

- Option also works with wifi control system

- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours 

- Two-year warranty

Quality pool lights

At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.

If you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is a lot better than working out the entire installation instruction on this online shop. We will be happy to advise you.

IMPORTANT 

- The product should not be tested out of the water for more than 30 seconds. 

- No transformer is included.

This new series of PLUG-IN lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.

These lamps are not in stock , these are placed on order, and you can also get these lamps with longer cable.

Specifications

- Fully resin filled,100% waterproof

- Ultra slim design in 13 mm thickness

- 2 wire external or 4 

- Size 98*H75 mm

- Voltage : 12/24V AC/DC

- Waterproof grade: IP68

- Beam angle: 120°

- Working environment temperature : -25°C~45°C

- Wattage : 9W

- Brand leds : Epsper 2835

- Light colour : Warm white / RGB / RGB+W

- Cable length : 2.5 metres

- Energy class : +A

- Material : Fully resin filled plastic | Anti UV PC

- Option also works with wifi control system

- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours 

- Three year warranty

Quality pool lights

At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.

If you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is a lot better than working out the entire installation instruction on this online shop. We will be happy to advise you.

IMPORTANT 

- The product should not be tested out of the water for more than 30 seconds. 

- No transformer is included.

This new series of PLUG-IN lamps is very easy to fit and replace. The cable has a click system, so no more messing around with heat shrink or resin.

These lamps are not in stock , these are placed on order, and you can also get these lamps with longer cable.

Specifications

- Fully resin filled,100% waterproof

- Ultra slim design in 13 mm thickness

- 2 wire external or 4 

- Size 98*H75 mm

- Voltage : 12/24V AC/DC

- Waterproof grade: IP68

- Beam angle: 120°

- Working environment temperature : -25°C~45°C

- Wattage : 9W

- Brand leds : Epsper 2835

- Light colour : Warm white / RGB / RGB+W

- Cable length : 2.5 metres

- Energy class : +A

- Material : Fully resin filled plastic | Anti UV PC

- Option also works with wifi control system

- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours 

- Three year warranty

Quality pool lights

At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.

If you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is a lot better than working out the entire installation instruction on this online shop. We will be happy to advise you.

IMPORTANT 

- The product should not be tested out of the water for more than 30 seconds. 

- No transformer is included.

Nice quality ABS plastic pool lights easy to mount so to the wall. comes with plastic wall adapter.

Available in single colours and RGB
RGB lamp is four-core, is also made for the RGB Smart system.

Specifications
- Fully resin filled, 100% waterproof
- ABS plastic anti-UV
- Ultra slim design in 25 mm thickness
- 2-4 wire external
- Size 205 x 25 mm
- Voltage : DC12V
- Waterproof grade: IP68
- Beam angle: 45°
- Working environment temperature : -25°C~45°C
- Wattage : 30 Watt
- Number of leds : 62 pcs
- Brand leds : Epsper smd 5054
- Light colour : Warm white / RGB
- Cable length : 2 metres
- Energy class : +A
- Material : Fully resin filled plastic | Anti UV PC
- Brightness : W 2550 Lumen | RGB 1650 Lumen
- Option also works with wifi control system
- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours
- Two-year warranty

Quality swimming pool lights
At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.

Installation of the swimming pool light
Mounting the pool lamp is very easy. We recommend mounting the pool light at about 75 centimetres (from the top of the pool).

Should you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is much better than working out the entire installation instruction on this online web shop. We will be happy to advise you.

IMPORTANT
- The product should not be tested out of the water for more than 30 seconds.
- No transformer is included.

Nice quality ABS plastic pool lights easy to mount so to the wall. comes with plastic wall adapter.

Available in single colours and RGB
RGB lamp is four-core, is also made for the RGB Smart system.

Specifications
- Fully resin filled, 100% waterproof
- ABS plastic anti-UV
- Ultra slim design in 25 mm thickness
- 2-4 wire external
- Size 205 x 25 mm
- Voltage : DC12V
- Waterproof grade: IP68
- Beam angle: 45°
- Working environment temperature : -25°C~45°C
- Wattage : 30 Watt
- Number of leds : 62 pcs
- Brand leds : Epsper smd 5054
- Light colour : Warm white / RGB
- Cable length : 2 metres
- Energy class : +A
- Material : Fully resin filled plastic | Anti UV PC
- Brightness : W 2550 Lumen | RGB 1650 Lumen
- Option also works with wifi control system
- Extremely energy efficient, with a lifespan of possibly up to +-40,000 hours
- Two-year warranty

Quality swimming pool lights
At XPRO POOL, we choose quality. The pool lights are made of high-quality ABS and highly resistant to chemicals and UV-C.

Installation of the swimming pool light
Mounting the pool lamp is very easy. We recommend mounting the pool light at about 75 centimetres (from the top of the pool).

Should you have any questions before or during installation, please contact us by phone free of charge and we will explain it to you in detail. That is much better than working out the entire installation instruction on this online web shop. We will be happy to advise you.

IMPORTANT
- The product should not be tested out of the water for more than 30 seconds.
- No transformer is included.

LED Pool Lighting Controller Set 12V-24V with Remote Control

This LED pool lighting controller set provides full control over RGB, RGBW, RGBWW, Dual White and single color pool lights. The controller features a built-in 2.4 GHz WiFi module, so no additional modules are required.

Installation is simple. Connect the controller to a 12V or 24V power supply and pair it with the Smart Life (Tuya) app. Control is available via WiFi, Bluetooth or the included remote control.

The controller is compatible with Google Home and Amazon Alexa for voice control. The 2.4 GHz RF signal ensures a stable range up to 30 meters.

Key features

Built-in WiFi module
Plug and play setup
Smart Life app control
Voice control via Alexa and Google
Bluetooth backup control
Compatible with most LED pool lights

Technical specifications

Voltage 12V – 24V
Maximum output 15A total
6A per channel
Power 12V < 180W
Power 24V < 360W
Dimensions 120 x 36 x 22 mm
Signal RF 2.4 GHz
Range up to 30 meters

Suitable for RGB, RGBW, RGBWW, Dual White and Single Color pool lights

LED Pool Lighting Controller Set 12V-24V with Remote Control

This LED pool lighting controller set provides full control over RGB, RGBW, RGBWW, Dual White and single color pool lights. The controller features a built-in 2.4 GHz WiFi module, so no additional modules are required.

Installation is simple. Connect the controller to a 12V or 24V power supply and pair it with the Smart Life (Tuya) app. Control is available via WiFi, Bluetooth or the included remote control.

The controller is compatible with Google Home and Amazon Alexa for voice control. The 2.4 GHz RF signal ensures a stable range up to 30 meters.

Key features

Built-in WiFi module
Plug and play setup
Smart Life app control
Voice control via Alexa and Google
Bluetooth backup control
Compatible with most LED pool lights

Technical specifications

Voltage 12V – 24V
Maximum output 15A total
6A per channel
Power 12V < 180W
Power 24V < 360W
Dimensions 120 x 36 x 22 mm
Signal RF 2.4 GHz
Range up to 30 meters

Suitable for RGB, RGBW, RGBWW, Dual White and Single Color pool lights